- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
Posted on 2/25/13 at 4:12 pm to Drew Orleans
If you bought a complete upper, it only attaches to the lower one way.
Posted on 2/25/13 at 4:14 pm to hashbrowns
Posted on 2/25/13 at 4:24 pm to Drew Orleans
Posted on 2/25/13 at 4:26 pm to Drew Orleans
That has nothing to do with connecting the upper to the lower.
That was just a non staked castle nut failing
That was just a non staked castle nut failing
Posted on 2/25/13 at 4:26 pm to Drew Orleans
I can't watch youtube vids, damn work filters. But if someone says their castle nut failed they either over torqued the shite out of it, or didn't tighten it at all.
Posted on 2/25/13 at 4:49 pm to hashbrowns
Posted on 2/25/13 at 5:06 pm to Drew Orleans
quote:
What part of the build will that be necessary for?
I use channel locks to push the 2 roll pins through (bolt catch and trigger guard). Also i forgot to mention the biggest allen wrench that can fit through the takedown pivot hole. Makes holding that detent in so you can slide the takedown pivot in alot easier. Other than that you just need a long screw driver or whatever for the pistol grip screw.
Posted on 2/25/13 at 5:47 pm to Soul Gleaux
Posted on 2/25/13 at 6:40 pm to TigerTatorTots
LINK
Pretty good read on the rise of the AR in wired magazine. Author is a native Louisianian.
Pretty good read on the rise of the AR in wired magazine. Author is a native Louisianian.
This post was edited on 2/25/13 at 6:51 pm
Posted on 2/25/13 at 9:33 pm to colorchangintiger
I posted some pics in the ammo thread about the parts that I just got. My BCG looks a little off and had some white shite between the notches. I chipped it off but it took the black finish with it. Should I return it based off this and the wear marks from the test fire?
Again, picks are in the ammo thread.
Again, picks are in the ammo thread.
Posted on 2/25/13 at 9:41 pm to Drew Orleans
Looks fine to me, but I can't tell what white stuff you're talking about, all I see is camera flash.
Posted on 2/25/13 at 9:43 pm to CP3
The white stuff is between the notches in one of the earlier pics. I knocked it off and it took the finish with it. You can see that in the last pic I posted.
Posted on 2/25/13 at 9:46 pm to ReefDonkey
why you mad?
And your BCG looks fine, I wouldn't worry about it
And your BCG looks fine, I wouldn't worry about it
Posted on 2/25/13 at 9:49 pm to CP3
eta:
This post was edited on 2/25/13 at 9:51 pm
Posted on 2/25/13 at 9:50 pm to CP3
Hope so.
So when I build this tomorrow I am suppose to wipe all the excess oil off of my upper right? Wipe the oil off the outer parts but leave it on the BCG and in the barrel?
So when I build this tomorrow I am suppose to wipe all the excess oil off of my upper right? Wipe the oil off the outer parts but leave it on the BCG and in the barrel?
Popular
Back to top
Follow TigerDroppings for LSU Football News