Started By
Message
locked post

Sod and fence help- advice needed

Posted on 8/14/12 at 7:19 am
Posted by trident
Member since Jul 2007
4856 posts
Posted on 8/14/12 at 7:19 am
I was priced for a fence in the slidell area yesterday for $13 linear ft for piine and $15 linear ft for cedar? Is that a good price?

How hard is build a fence myself? I have installed glue down hardwood floors, tile, and baseboards before.


Also, I will be putting down some new sod and want to know how to make sure it grows in properly. Do I just water it or is there anything that I need to put on it? It will be centipede btw.



ETA: I meant linear foot
This post was edited on 8/14/12 at 7:45 am
Posted by wickowick
Head of Island
Member since Dec 2006
46352 posts
Posted on 8/14/12 at 7:21 am to
I assume you mean lf, sf would be outragious...
Posted by greasemonkey
Macclenny Fl aka south JAWJA
Member since Aug 2012
2813 posts
Posted on 8/14/12 at 7:23 am to
I hope that's a linear foot not a square foot price.

just water the sod a couple times a day the first week and then taper off a little at a time
Posted by Chris4x4gill2
North Alabama
Member since Nov 2008
3116 posts
Posted on 8/14/12 at 7:24 am to
For the sod, make sure all edges are covered with dirt - mound it up slightly to the top of the sod all along the edge. Then water daily. If its not down yet, make sure you prep the soil first, use a rake or small disc to break up the dirt before laying the sod down.

I havent priced fence so I cant help you there.
Posted by trident
Member since Jul 2007
4856 posts
Posted on 8/14/12 at 7:25 am to
quote:

I assume you mean lf, sf would be outragious...


linear foot sorry? Is it a decent price?
Posted by trident
Member since Jul 2007
4856 posts
Posted on 8/14/12 at 7:26 am to
quote:

For the sod, make sure all edges are covered with dirt - mound it up slightly to the top of the sod all along the edge. Then water daily. If its not down yet, make sure you prep the soil first, use a rake or small disc to break up the dirt before laying the sod down.


I am getting some fill put in so I think this would cover that
Posted by wickowick
Head of Island
Member since Dec 2006
46352 posts
Posted on 8/14/12 at 7:27 am to
Sounds fine how long will you be in the home? If it is a long term home you might want to consider upgrading to metal post. Short term it will be fine...
Posted by trident
Member since Jul 2007
4856 posts
Posted on 8/14/12 at 7:28 am to
quote:

Sounds fine how long will you be in the home? If it is a long term home you might want to consider upgrading to metal post. Short term it will be fine...


at least 10 years. The fence I have now is rotting and has been there for >15 yrs
Posted by fishfighter
RIP
Member since Apr 2008
40026 posts
Posted on 8/14/12 at 7:29 am to
That is one of those DIY jobs that can save you 3/4 cost. Not hard to do.
Posted by trident
Member since Jul 2007
4856 posts
Posted on 8/14/12 at 7:31 am to
quote:

That is one of those DIY jobs that can save you 3/4 cost. Not hard to do.


I know I could probably do it but am a little bit scared. It would take me a long time to complete
Posted by TexasTiger
Katy TX
Member since Sep 2003
5343 posts
Posted on 8/14/12 at 7:40 am to
buddy in the houston area has his own fence company...he just got finished fencing my yard. He said he charges $15-18 a LF for cedar. He says he doesn't mess with pine pickets because of how they warp over time.

all I had to pay was cost of material plus $2 a lf to the 2 messicans he uses to put the fence up. They ran close to 400ft of fence. best money I ever spent...



This post was edited on 8/14/12 at 7:56 am
Posted by trident
Member since Jul 2007
4856 posts
Posted on 8/14/12 at 8:18 am to
quote:

all I had to pay was cost of material plus $2 a lf to the 2 messicans he uses to put the fence up. They ran close to 400ft of fence. best money I ever spent


well aint that freaking nice. I dont have any hook ups
Posted by TexasTiger
Katy TX
Member since Sep 2003
5343 posts
Posted on 8/14/12 at 8:26 am to
if you can get an auger and know how to run a string to make a straight line its not that techincal. Just labor intensive.

they did that in 2 days and that was digging the post holes with a post hole digger. I felt bad for those guys for a little while...

So if you had some help and the right tools there is no reason you couldn't knock it out over a weekend.
Posted by tigerfoot
Alexandria
Member since Sep 2006
61370 posts
Posted on 8/14/12 at 8:30 am to
I like that top rail turned like that. And I also have seen alot of fences go up with two runners.

To the op, it depends on how many gates, what post material, how many runners, etc. I had one done in Alex 7 years ago for like 12 a foot, but they did an absolutely terrible job.
Posted by Boats n Hose
NOLA
Member since Apr 2011
37248 posts
Posted on 8/14/12 at 8:33 am to
quote:

I like that top rail turned like that.

One of our neighbors has a fence like that, made it a lot easier to climb over and grab a baseball when someone hit a home run in yard ball
Posted by TexasTiger
Katy TX
Member since Sep 2003
5343 posts
Posted on 8/14/12 at 8:42 am to
quote:

I like that top rail turned like that


Yeah thats pretty common in our area.

I also like the 1"x6" rot board across the bottom. adds a little extra height and hopefully it will extend the life of the pickets.
Posted by ccvick1
Keithville, LA
Member since Jun 2012
105 posts
Posted on 8/14/12 at 9:33 am to
$13 and $15 sound about normal. I would definitely go with cedar and metal posts. Doing it yourself is fine, but the next time I need one I will find some cheap labor.
Posted by bbvdd
Memphis, TN
Member since Jun 2009
28610 posts
Posted on 8/14/12 at 10:51 am to
I built this one earlier this year:



It really wasn't that bad. The worst part of the whole think was the holes. I even had an auger. The soil here is mostly clay and it about killed me digging them.

Ran the 3 corners and then ran a string. I had a couple of nail guns that made it go very fast as well.

Posted by Ziggy
Member since Oct 2007
22097 posts
Posted on 8/14/12 at 11:02 am to
quote:

I would definitely go with cedar and metal posts.

I recommend this as well.
Posted by GunForHire
Gunwaleford Rd
Member since Aug 2012
189 posts
Posted on 8/14/12 at 3:53 pm to
On what grounds? How do you propose attaching the three 2x4 runners to the metal post?

And $13 and $15 is average price for flat ground.
This job can be done yourself but it is not easy. I used to have a fencing company, and saw many a man quit before lunch break.
first pageprev pagePage 1 of 2Next pagelast page

Back to top
logoFollow TigerDroppings for LSU Football News
Follow us on X, Facebook and Instagram to get the latest updates on LSU Football and Recruiting.

FacebookXInstagram