In the master bath, the wall electrical outlets stopped passing current.

Have you tried another breaker?

safe bet you've got a GFCI tripped somewhere

As others have said 98% chance GFCI is tripped. If It is not an outlet above a vanity, it can be an outlet that the tub motor plugs into. This would be located behind an access panel under the tub, or in a vanity cabinet.

If you don’t know what we’re talking about, you probably just need to push the reset button in the middle of the funny looking outlet by the vanity sink.

quote:

---

Yep could be in another bathroom, kitchen, ...>??

---

Yep, bath, kitchen and garage are the usual spots. I helped a buddy of mine trace one down a couple years ago and the tripped unit wasn't in any of the usual spaces so had us stumped for a while; we found it in his attic where his attic fan was plugged into. First time I've ever seen that one.

Similar situation at my house, but we found it outside on the back porch.

quote:

---

As the others say, 95% chance that is a GFCI circuit tripped somewhere. Check anywhere you are likely to have wet conditions. Mine alleys trips in the garage, but that circuit controls the bathroom outlets too.

---

I haven't pulled the panel off the side of the tub, yet, but I have checked everything else. If there's a GFCI anywhere else, it has to be under that tub.

Everything else works. My entire house is mapped out, so I know exactly which breaker goes to which outlets, light switches, AC, Pool, outdoor lights. The only item not previously mapped out that operates via electricity in the house is the Jacuzzi, which we don't even use, and it's coming out when we start the bath remodeling project later this year or early next year.

quote:

---

Is there a breaker that only serves the circuit that is not working?

---

That seems to be the case. The closet is on a separate circuit. The lights in the bathroom are on a different circuit. The master bedroom is on a different breaker. I personally toned every outlet and wall switch back to the panel and have a panel map I made and printed. In the case of the oven, pool and Jacuzzi, these were easy to test without accessing the connection, although I've replaced oven since then and testing wasn't necessary. The pool lights receive power from an outdoor GFCI plug by my back door. The only connections I haven't personally inspected will be when I pop open the panel on the Jacuzzi.