- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Coaching Changes
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
New pool owner here...
Posted on 12/30/23 at 12:07 pm
Posted on 12/30/23 at 12:07 pm
and after the system primes (and shows pressure), the pressure falls to zero, while still moving water. skimmers are clear - any idea my issue here? TIA
Live in CLT area, been cold but nothing crazy.
Live in CLT area, been cold but nothing crazy.
Posted on 12/30/23 at 1:55 pm to geauxdroddz
Where is the pressure gauge? Any valves in the system that may be opening/clsoing?
If the pumps are on and water is flowing, you have pressure on the pump discharge.
If the pumps are on and water is flowing, you have pressure on the pump discharge.
Posted on 12/30/23 at 4:15 pm to geauxdroddz
The new motors will operate at a higher RPM to prime the system and then lower RPMS. You should be able to select how many RPMs the pump is operating at. It could just be set too low to register any pressure
Posted on 12/31/23 at 9:53 am to geauxdroddz
Mine does the same. Since you are a new owner, check out troublefreepool if you haven't already. It will save you thousands in chemicals.
Posted on 1/2/24 at 9:21 pm to geauxdroddz
Call your pool installer, he prob knows the system inside and out
Posted on 1/3/24 at 2:40 pm to geauxdroddz
mine did this last week. skimmer was clear, everything was running, but there was air in the lines and the pressure was at zero. turns outs the water level was low. Someone turned off my autofill. it was only like an inch or so low, so nothing crazy. after it got back up to the right level, it was fine.
Posted on 1/3/24 at 4:11 pm to geauxdroddz
Is your pump above or below the water level of the pool?
ETA:
Sometimes the cause is an obstruction between the strainer basket and pump. This can happen when a high volume of leaves dislodges the strainer basket and flows into the inlet below.
Amazon sells a Drain King #345 bladder that fits your garden hose, designed to clean pool drains.
This bladder can sometimes dislodge a deep clog if inserted and pressurized in the opening below the strainer basket.
ETA:
Sometimes the cause is an obstruction between the strainer basket and pump. This can happen when a high volume of leaves dislodges the strainer basket and flows into the inlet below.
Amazon sells a Drain King #345 bladder that fits your garden hose, designed to clean pool drains.
This bladder can sometimes dislodge a deep clog if inserted and pressurized in the opening below the strainer basket.
This post was edited on 1/3/24 at 4:24 pm
Popular
Back to top
6








