- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Coaching Changes
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
Frigidaire gas stove not heating when baking; everything else works (RESOLVED)
Posted on 11/26/23 at 10:01 pm
Posted on 11/26/23 at 10:01 pm
Range burners work and the broil feature works as well. Internet says it's likely a dirty or faulty igniter or another switch near the igniter.
Only thing I know is that when I set a baking temperature, I will hear a click shortly after. Anyone familiar with this type of fix?
RESOLVED:
Part swap and we are good to go
Only thing I know is that when I set a baking temperature, I will hear a click shortly after. Anyone familiar with this type of fix?
RESOLVED:
Part swap and we are good to go
This post was edited on 11/30/23 at 1:03 pm
6
Posted on 11/26/23 at 10:55 pm to BilbeauTBaggins
What era is it?
2000? probably a $15 ignitor and a 10min swap.
2020? control board. $275. 6mo backorder. just buy a new oven.
2000? probably a $15 ignitor and a 10min swap.
2020? control board. $275. 6mo backorder. just buy a new oven.
Posted on 11/27/23 at 3:16 am to BilbeauTBaggins
Lower igniter is probably bad.
Posted on 11/27/23 at 7:53 am to BilbeauTBaggins
Bad igniter. Universal Square type will work. Part number.
5303935066
5303935066
Posted on 11/27/23 at 7:53 am to Turnblad85
Frigidare control board are super common. Not that bad in price either usually.
Posted on 11/27/23 at 8:33 am to BilbeauTBaggins
I think I know what the problem is. It’s a Frigidaire
Posted on 11/27/23 at 8:48 am to Turnblad85
2022 sadly
Posted on 11/27/23 at 9:17 am to Napoleon
Why would it be the control board if everything else works? I'm going to assume bad igniter since I'm guessing the clicking noise is the igniter itself not functioning properly.
Posted on 11/27/23 at 9:28 am to BilbeauTBaggins
The control board has 3 relays. They fail often. If the HV relay fails you'll hear a click but nothing happens usually because there is a burnt spot where the relay output pin is on the board. It's an easy fix if you solder but even easier to change out the board.
The proper procedure is to test for voltage to the igniter when turned on. If voltage present 99% of time is a bad igniter. If voltage not present is a bad control. You have a relay for bake, broil and one for the second leg. If bake and broil don't work is the second leg relay.
Also just because an igniter glows doesn't mean it's good. It has to draw 3.2 amps of current to open the safety valve. This should happen in 45 seconds or less. So many times we have glowing igniter but they only draw 2.5 -3 amps and the oven either never lights or takes minutes to light.
The proper procedure is to test for voltage to the igniter when turned on. If voltage present 99% of time is a bad igniter. If voltage not present is a bad control. You have a relay for bake, broil and one for the second leg. If bake and broil don't work is the second leg relay.
Also just because an igniter glows doesn't mean it's good. It has to draw 3.2 amps of current to open the safety valve. This should happen in 45 seconds or less. So many times we have glowing igniter but they only draw 2.5 -3 amps and the oven either never lights or takes minutes to light.
Posted on 11/27/23 at 9:36 am to Napoleon
Gotcha. Makes sense.
I'm going to run with a bad igniter and replace that. Part coming in Wednesday for only $18. If it's not that then I'll go with the control board.
I'm going to run with a bad igniter and replace that. Part coming in Wednesday for only $18. If it's not that then I'll go with the control board.
Posted on 11/27/23 at 9:42 am to BilbeauTBaggins
Be careful with the igniter ceramic. If you look at it wrong it'll break. Make sure it's in one piece before you install it. If it's the universal type only use the ceramic wire nuts with no electric tape.
Posted on 11/27/23 at 10:53 am to Napoleon
Are there already wire nuts inside? I can't imagine those withstanding the oven temperatures.
Posted on 11/27/23 at 11:11 am to BilbeauTBaggins
Mine came with the wire nuts. Fixed it this past Saturday.
$16 plus $5 for shipping.
$16 plus $5 for shipping.
Posted on 11/27/23 at 12:13 pm to BilbeauTBaggins
Yes if it's universal it will come with ceramic wire nuts. They are rated to 2500°F. They are fine in an oven.
Posted on 11/27/23 at 12:18 pm to BilbeauTBaggins
quote:
BilbeauTBaggins
ur a lucky turd. You got the main man himself giving you the word. Let us know if it gets fixed.
Posted on 11/27/23 at 2:55 pm to Turnblad85
We'll see. I spent a pretty penny on this thing so hopefully it works out.
Posted on 11/29/23 at 12:08 pm to Napoleon
I have a whirlpool oven that is no longer made. The board was bad and I had it repaired and changed top and bottom heating elements in the oven. It doesn't get over 350 on bake. Any suggestions.
Posted on 11/30/23 at 1:03 pm to BilbeauTBaggins
Replaced the bottom igniter and works like a charm. $17 part from Amazon, 30 minutes of kneeling and losing screws and we have a working oven that is barely two years old.
Page 1 of 1
Popular
Back to top
Follow TigerDroppings for LSU Football News