re: Broadhead sharpening

I use a KME sharpener and would highly recommend it to anyone. You can adjust the bevel angle by just adding/removing a little painters tape to the rolling wheel. I have sharpened both cutthroats and VPAs on it and they are scary sharp. I use diamond stones - I forget the actual grits but it is about 4-5 different grits then finish by stropping on cardboard with a little compound on it. The twist rate of the single bevels with a 4 fletch helical is crazy. I shoot into a Rhinehardt BH target, and the arrow makes about 4 revolutions once it impacts the target. Bareshaft tune first and the BH should fly good. Just my 2 cents