hugemongus

Stopped by my local SK and was pleasantly surprised when I was handed the "eco foam" cup. We will consider this the "New Coke" moment for SK and move on.

Call the paver supply houses and ask them.

They usually have a good list of reputable installers. They'll also know who buys more material - this is (hopefully) a sign that they are good at what they do.

Check out Fanimation Extraordinaire

Did this recently - brick was ugly.

Painters primed with this (added color) - LINK

~2600 sqft house took about 30-35 gallons of this primer. The bricks soak it up, but you can tell its a heavy coat.

Finish coat was SW Duration - lifetime warranty.

I didn't have the deep mortar cracks so they rolled with a heavy nap. If you have deep mortar, spraying is the only way - but they can roll it back to try and get a consistent coverage on the brick face.

Get a good contractor with references. Spraying can get ugly real quick with your plants, etc.

1. Update your resume
2. Post it here

I have one, but have the same issues as others - the chip. In places that don't require a chip it works 90%+. They are promising the chip upgrade in the spring.

SOMETIMES switching airplane mode on, waiting 15 sec, then turning it back off may help re-establish an orphaned connection to the tower. It's just too many phones for one or two towers.

Why not spend some TAF Dollars on wifi? Yes, it would require a lot of access points, but could be done.

Hell, I would even pay $5 for reliable connectivity during a 4-5 hour span.