Favorite team:LSU 
Location:
Biography:
Interests:
Occupation:
Number of Posts:46
Registered on:9/13/2007
Online Status:Not Online

Recent Posts

Message
Searched and didnt see anything so here it is. We have a quota but apparently it's ok for the Feds to blow up thousands of pounds of snapper. http://www.local15tv.com/news/local/story/Explosive-Fed-Mandate-Killing-Thousands-of-Red/xj8T4zPamkOGc8fuT40W_Q.cspx :banghead:...

Blue water rod recommendations

Posted by tigerdawg129 on 11/16/12 at 8:15 pm
Need a versatile rod that will handle species like snapper and ajs that won't break the bank. Any recommendations are appreciated. ...

Marine VHF radio suggestions

Posted by tigerdawg129 on 10/3/12 at 9:11 pm
Old radio and antenna finally crapped out. Need suggestions on replacements from anyone knowledgeable. ...
Luckily it's fresh water. Apparently my cover has a hole and the drain plug was in so I'm guessing rain water flooded the bilge and got in through the dipstick. I'll try the seafoam. ...
Bilge got flooded and got water in cylinders and crank case. Pulled the plugs and compressed water out of cylinders. Changed oil and filter once but oil still looks like chocolate milk. Anyone know of a good way to get the rest of the water out? Also need a recommendation on a good oil pump, mine is...

Scag vs Exmark mowers

Posted by tigerdawg129 on 2/23/12 at 10:14 am
Trying to decide between the two brands for a commercial grade zero turn mower for 8 acres. Anyone have a particular preference for one brand over the other? Also, should I go with an air or liquid cooled engine? Any advice is appreciated. ...

re: Valuing Guns..

Posted by tigerdawg129 on 2/5/12 at 10:52 pm
Sorry to hear about your wife's paw paw. Send me an email with the list when you get a chance. mikem129@yahoo.com...

Weatherby sa-08

Posted by tigerdawg129 on 11/27/11 at 11:12 pm
Looking for a budget autoloader for duck hunting and have had good experience with Weatherby before. Anyone have an sa-08? If so, would you buy it again?...

Weatherby sa-08

Posted by tigerdawg129 on 11/27/11 at 11:11 pm
Looking for a budget autoloader for duck hunting and have had good experience with Weatherby before. Anyone have an sa-08? If so, would you buy it again?...
I'm thinking about getting off the wmas and into a deer lease. What are some questions to ask when comparing leases? Thanks ahead of time for the input. ...

Wma quail hunting

Posted by tigerdawg129 on 10/18/11 at 9:47 pm
Do any of the wmas in south la or ms offer quail or any upland game hunting? If so, which ones are best to bring kids?...
Thanks to all that replied. The opinions seem to be mixed but more seem to favor the 870 express. With a used bps being 100 more is it worth the extra money? Someone also mentioned 870 wingmaster, how much are they going for? :cheers:...
Need a new shotgun for duck season. Need opinions on the better buy, new 870 express for $250 or used Browning bps hunter for $349. :cheers:...

Weatherby 92

Posted by tigerdawg129 on 10/6/11 at 9:51 pm
Just inherited a weatherby 92 pump 12 gauge. There is not much online about this model other than that it was made in the 80s in Japan. My question is can it safely fire steel shot? Any advice is appreciated?...

re: Remington model 11

Posted by tigerdawg129 on 9/21/11 at 8:33 pm
My m11 has never been refinished but I will definitely check the recoil buffer. Thanks for the advice. :cheers:...

Remington model 11

Posted by tigerdawg129 on 9/20/11 at 10:08 pm
I know it would be unsafe to shoot my model 11 with steel loads, but what about modern lead loads? Too much pressure on the rings? Advice is appreciated....

re: camo parka @ Cabellas

Posted by tigerdawg129 on 9/13/11 at 9:40 pm
Who did you talk to about getting the parka and bib in break up for the same price as the natural gear that was on clearance?...

Bore guides

Posted by tigerdawg129 on 7/13/11 at 11:15 pm
Anyone use bore guides when cleaning a rifle barrel? Are they necessary?...

Mower advice

Posted by tigerdawg129 on 6/28/11 at 10:35 pm
I have 8 acres and need a new mower. Would it be better to go with a tractor or a large commercial mower?...

flounder gig

Posted by tigerdawg129 on 5/23/11 at 8:28 pm
Looking for suggestions on making a good flounder gig without having to weld anything. Any advice is appreciated....