Duck Island

Prime with either oil or latex primer(oil prob better) then go back and caulk and putty all the cracks and holes and then follow with 2 coats of good latex wall paint.

I had the same situation and ended up running my 30” pit and a 2- burner cooktop on propane. Tank of propane lasts a long time so I don’t switch often. We use the burner a ton for searing, frying and boiling. Tank is stored under the pit inside the SS doors. I’m perfectly happy with the setup and would do it again.

Call a locksmith. I had those years ago and it seems like a plate that spins to expose the screws in there? Sorry not more help bc it’s been so long since I changed them but I remember the locksmith telling me how to do it. Had them on pool gates and they’re made so they can’t be unscrewed by a random person with a screwdriver. There is def a technique to do it though.

FWIW I bought an A300 and ended up trading it for the A400. Wouldn’t cycle AA loads and I didn’t like the cheek slap recoil. A400 is a whole diff animal, little heavier but I like that extra weight.

High Performance cookers uses the same technology.

Yes that’s abt right.

Yes it’s Covers Unlimited. I had a boat cover made by them years ago and just happened to ask and they said they could do it. I was missing one of the jump seat bottoms and needed to copy the one I had and cover them both and they did it.

We put 1-1/2” strips of hdpe we cut from a sheet and installed on our Go-Devil boat trailer bunks and it takes nothing to shove them off into the marsh now. As others said, just don’t unhook until in the water because she’s coming off of there!

A/C guy said it dries up when you run the air consistently. I checked out the old coils when they brought them down and saw some growth on them. They smelled like arse, worse than the air coming out was.

Our group of duck hunters all have gone to Simms waders over the last few years. Couple guys have the G4 but they are over $1k plus. I have the Freestone Z Bootfoot model and they are the best I’ve ever had. Check the fly shops online, I ended up with 10% off plus free shipping which came to under $600. Kuiu has waders now and they look great and are made by Simms for Kuiu.

Woerner on Airline will sell it by the piece.

Sheetrock guys routinely scrape popcorn off. They can sand and spray texture and make it look good. You will have the mess but that can be cleaned.
If you want wood consider v-groove pine that you finish on the ground and then just cut to size and finish nail it up on 1x4 strips. Just did one where the boards were beat up a bit then torched, stained and slightly white-washed. Beautiful look. Whatever finish you like it’s reasonably priced and covers the popcorn without having to remove it.

So what is the correct mixture? The msm turf came with a measuring funnel in oz. How much in oz. Should be mixed in 1 gallon for spot spraying?

I picked mine up Monday and it has a shim installed but no others came w/ it. Comes w/ a couple plastic spacers to adjust lop. BPS said 29 of them arrived from online orders. I think they are out of the sale guns.

Home Depot carries the the replacement mechanism for those. Turn the power off and install a new one for abt $80. I think.