Snow

re: EBR 3.13 Mill Tax Renewal for EMS

Posted by Snow on 10/16/23 at 9:24 am

[quote]I thought EMS still sends you a bill. Why do they need a tax at all? [/quote] They can come to your house and provide care and it’s free unless they take you somewhere. ...

re: Scott Hall pleads guilty in Georgia case against Trump - what did he actually DO??

Posted by Snow on 9/30/23 at 8:27 am

Don’t sing it, bring it. ...

Political Talk

re: Troubleshooting bedroom humidity levels (continued from previous thread)

Posted by Snow on 5/18/23 at 8:11 pm

I fought humidity issues for years and eventually figured out my blower speed was set too high. It’s not hard to adjust, but it will vary based on the system. My house went from 60% - 75% humidity to 45% - 60% year around. ...

re: My wife has breast cancer; prayers and advice appreciated (Update in OP)

Posted by Snow on 5/1/23 at 6:53 am

I’m currently going through the same, it’s tough. I would highly suggest your wife get a medical marijuana card. It’s a game changer for dealing with chemo side effects. My wife went from constant puking and barely able to get out of bed to little to no puking and able to eat. Her oncologist wasn’t ...

re: Plantar fasciitis/heel spur/heel pain remedy’s, what have you found that works?

Posted by Snow on 10/5/22 at 10:43 pm

Get some zero drop shoes. I really like the xero brand. Worked for me. ...

re: Spawn/Remnants of Julia - 93L NHC 60%

Posted by Snow on 10/2/22 at 1:20 pm

Bro!...

re: Who at the car show in the O’Neal Hobby Lobby parking lot?

Posted by Snow on 9/10/22 at 8:09 am

Ahhhhh being a fresh driver thinking you have a cool car. I went a few times about 20 years ago, but it was on Florida blvd back then. ...

re: Who do I have to hire to figure out why the humidity level is high my house?

Posted by Snow on 8/31/22 at 8:39 am

[quote]First check the setting on the air handler. If it set on the mid setting, lower it to the low setting so that the unit runs longer to better dehumidify your house. [/quote] This was my problem. It took me 6 years, 3 different a/c companies, and tigerdroppings for me to figure it out. *spo...

re: Any of y’all use dehumidifiers in your home?

Posted by Snow on 8/5/22 at 12:25 pm

I was having humidity issues and it ended up being an issue with my a/c system. Slowed down the blower fan and now my humidity stays below 60% unless my a/c doesn’t run for hours....

re: World of Warcraft just isn’t the same.

Posted by Snow on 7/30/22 at 8:59 am

I just started playing again. A couple buds talked me into it….I’ll see how it goes. ...

re: Diehard gas mower fan, now with battery powered mower. AMA

Posted by Snow on 7/28/22 at 3:13 pm

[quote]Did that kobalt have the Turbo mode? I know if mine didn't have that, it would be nowhere comparable to my Toro. With the turbo mode, I get similar RPMs and cutting power as my Toro had. Without Turbo, I would not even consider a battery mower.[/quote] It didn’t have a button or anythin...

re: Diehard gas mower fan, now with battery powered mower. AMA

Posted by Snow on 7/28/22 at 1:48 pm

I used to have a Kobalt 80v mower. It did work pretty good. I had an extra battery so it wasn’t a big deal when the battery died. I got rid of it eventually though. If the grass gets a little tall it would really struggle. Then one of the batteries died so I sold it and went back to gas power....

re: Humidity Level New Construction

Posted by Snow on 7/27/22 at 10:57 am

[quote]nteresting. My only first hand experience with PSC blower is on my parents Carrier furnace and it has dip switches for speed settings.[/quote] I will double check it, but I didn’t see any other adjustments. Crawdad, notsince98. Thanks again for all the info and guidance! I’m still blow...

re: Humidity Level New Construction

Posted by Snow on 7/27/22 at 9:45 am

[quote]You should not be changing wiring on the blower motor. The blower speeds are adjusted by dipswitches located on the furnace control board.[/quote] I have a PSC blower which does not have the dip switches. ECM blowers usually have them I believe. ...

re: Humidity Level New Construction

Posted by Snow on 7/27/22 at 6:32 am

[quote]That’s correct M1 is just a “dead” parking spot for a wire not being used to run the heat or cool. You might want to put the blue wire (medium speed) on the cool spade connector instead of the red (slow speed) to see if you get reduced humidity, as you have the potential to freeze the evapora...

re: Humidity Level New Construction

Posted by Snow on 7/26/22 at 8:31 pm

I switched the black and red wire. I’ll see how this works. It came back on! ...

re: Humidity Level New Construction

Posted by Snow on 7/26/22 at 8:07 pm

After some further inspection and research. This is how the blower is hooked up. Heat - Blue (Medium speed?) Cool - Black (High speed?) M1 - Red (Low Speed?) M1 is the spare spot I believe. If this is all correct, do I need to slow it down? I'm willing to try just about anything at this po...

re: Humidity Level New Construction

Posted by Snow on 7/26/22 at 7:44 pm

Rheem RGPS 07EAMGR Outside is a 4 ton...

re: Humidity Level New Construction

Posted by Snow on 7/26/22 at 7:23 pm

Here are pictures of the model and wiring. 5kcp39ng [link=(https://imgur.com/a/wTEy33A)]LINK[/link]...