Reloading Tutorial - You guys asked for it!

Alright so I've compiled a few short videos of handgun reloading. If you guys like it and are interested in bulk rifle loading, I'll cover that later as well.

Enjoy!

EDIT (again): Before diving into reloading, be sure you look at reloading manuals and gather as much information as possible. The risk of blowing up a gun (or yourself) is low since the loads in manuals are conservative anyway, but there is still a risk. Be extremely thorough and diligent before attempting reloading. This guide is simply here to give you an idea of what to expect when you start loading. Everyone has their own way of doing things and mine may not be the best. Use your own discretion.

#1 - Resize and Deprime
#2 - Expand
#3 - Prime
#4 - Charge
#5 - Seat

Setting up your dies:

Resize/Deprime Die Setup
Expanding Die Setup
Seating/Crimping Die Setup

EDIT:

Products used:

RCBS Carbide Die set - LINK
RCBS Rock Chucker Press (mine is a much older version) - LINK
RCBS Shell Holder (for press) - LINK
Lee Auto Prime (mine is much older) - LINK
Lee Auto Prime Shell Holder - LINK
RCBS Uniflow - LINK
Lee Powder Scale (mine is much older) - LINK
Lee Powder Funnel - LINK

Ammo Materials Shown:

Federal Small Pistol Primers - LINK
CCI Small Rifle Primers - LINK
Alliant Power Pistol - LINK
Berry's Plated 100gr .356 bullets - source LINK

EDIT #2: Here are the extra rifle reloading goodies. I had a cold when I did this video so try to avoid being annoyed by my constant sniffling.

Rifle - #1 Resize and Deprime
Rifle - #2 Trimming
Rifle - #2.5 Swaging(This step for military brass only!)
Rifle - #3.5 Chamfering and Deburring
Rifle - #4 Charging
Rifle - #5 Seating

I oriented the numbers on the videos that correspond to the numbers on the pistol reloading series. I tried my best to keep it organized even though I made the videos at 2 different times.

Additional Products Used:

RCBS Small Base Die Set .223/5.56 - LINK
RCBS Small Base X-Die .223/5.56 - LINK (This die is used after the case has been resized and trimmed once in the other die)
RCBS Swaging Tool - LINK (For military crimp removal)
Lee .223 Remington Gauge and Holder - LINK
Lee Case Trimmer and Stud - LINK
RCBS Powder Trickler - LINK
RCBS Trim Mate - LINK (Includes deburring and chamfering bits but they suck compared to the ones I used. They are included in the Lyman kit listed below this.)
Lyman Case Prep Multi Tool - LINK
RCBS Case Lube Pad - LINK
RCBS Case Lube - LINK

Ammo Products shown:

6.5mm 120gr Barnes TTSX (.260 Rem) - LINK
IMR 4831 - LINK
Remington Large Rifle Primers - LINK

Enjoy!