Page 1
Page 1
Started By
Message
locked post

Question for any plumbers on the OT

Posted on 4/20/17 at 4:22 pm
Posted by j bro12
LA
Member since Jan 2012
1550 posts
Posted on 4/20/17 at 4:22 pm
The faucet for my kitchen sink randomly has low water pressure and the water doesn't always get hot. The water pressure becomes lower after using the side sprayer and it begins to make a whistling sound. I've checked all of the connections and hoses, but everything seems to be intact. I've also unscrewed the end piece of the faucet to check for debris and it was clean. All of the other faucets in the house work properly. Could I have bigger problems than just a broken faucet?
Posted by CHEDBALLZ
South Central LA
Member since Dec 2009
23348 posts
Posted on 4/20/17 at 4:25 pm to
It may have scald gaurd
Posted by NashBamaFan
Nashville
Member since Mar 2011
3136 posts
Posted on 4/20/17 at 4:25 pm to
Sounds like the cartridge needs to be replaced. What brand faucet? Moen?
Posted by TimeOutdoors
LA
Member since Sep 2014
13652 posts
Posted on 4/20/17 at 4:28 pm to
Inline how water heater? They one we have has a filter and caused us to have a similar problem until we replaced the filter.
Posted by j bro12
LA
Member since Jan 2012
1550 posts
Posted on 4/20/17 at 5:37 pm to
It doesn't have any branding on it. It was probably the cheapest crap the builder could find.
Posted by OceanTiger
Checking out Paradise
Member since Mar 2017
314 posts
Posted on 4/20/17 at 5:39 pm to
Call T-wayne. He's master plumber.
Posted by el Gaucho
He/They
Member since Dec 2010
60128 posts
Posted on 4/20/17 at 5:39 pm to
GET OUT NOW

This is often a sign that there is a water hammer building up under your slab

If you're reading this it may be too late, these things have been known to destroy city blocks
Posted by ruzil
WNC
Member since Feb 2012
18463 posts
Posted on 4/20/17 at 6:23 pm to
Check the aerator on the faucet as it may be plugged from debris from the dip tube going bad in your water heater.

Posted by QuietTiger
New Orleans
Member since Dec 2003
26256 posts
Posted on 4/20/17 at 6:27 pm to
Sometimes the flex lines from the pipes to the faucets have filters, try that.
Posted by TU Rob
Birmingham
Member since Nov 2008
13575 posts
Posted on 4/20/17 at 7:28 pm to
Is there a water filter under the sink? I apparently had one I never knew about until it sprung a leak. Yeah it wasn't filtering much anymore. After I replaced the filter the cold water pressure was much better.
Posted by QuietTiger
New Orleans
Member since Dec 2003
26256 posts
Posted on 4/20/17 at 7:32 pm to
So. you are happy or still looking?
Posted by LCA131
Home of the Fake Sig lines
Member since Feb 2008
77695 posts
Posted on 4/20/17 at 7:34 pm to
If it is not to difficult, switch the hot and cold lines feeding the mixer. Then see if the cold is diminished. Remember that the cold will now be the 'hot' on the faucet handle.

this will tell you if it is the faucet or something prior to the faucet like a supply line.
Posted by lsuwins3
Member since Nov 2008
1974 posts
Posted on 4/20/17 at 10:58 pm to
I had the same issue with my hot. After several years of use the little plastic piece inside the faucet broke loose. So when you turned on the water it floated up blocking the water. When I took it off and turned on the water it hit the ceiling. Changed out the faucet.
first pageprev pagePage 1 of 1Next pagelast page
refresh

Back to top
logoFollow TigerDroppings for LSU Football News
Follow us on X, Facebook and Instagram to get the latest updates on LSU Football and Recruiting.

FacebookXInstagram