- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
Briggs&Stratton CO Guard... Disable?
Posted on 6/15/19 at 1:19 pm
Posted on 6/15/19 at 1:19 pm
Does anyone know how to disable the CO Guard feature on a Briggs generator? We run this thing in a shed that’s outside of the camp. It’s a pain in the arse even with a fan ventilating the little shed.
Posted on 6/15/19 at 2:48 pm to deuceiswild
Extend the exhaust out thru the wall.
Posted on 6/15/19 at 2:49 pm to deuceiswild
so run the frickin exhaust pipe out the wall and then mount the muffler to it, its just regular 1" threaded pipe, it aint that hard.
if you insist on killing someone, then its most likely just a simple one wire safety kill switch circuit to connect to engine ground
if you insist on killing someone, then its most likely just a simple one wire safety kill switch circuit to connect to engine ground
Posted on 6/15/19 at 4:01 pm to keakar
We’d rather not go through the wall. And for crying out loud i said it’s in a shed specifically for the generator. No one stays in there, dolt. How the frick did you survive all these years without this sensor on yours?!?!?
Posted on 6/15/19 at 4:03 pm to keakar
My apologies for maybe being a little harsh. But i just finished reading replies on the OT. Should have known better than to post on there.
Posted on 6/15/19 at 4:13 pm to deuceiswild
quote:
We’d rather not go through the wall.
well then just run it up the wall then go out just under the rafters, that way no worries about any rain water getting in from the hole.
you could also go straight down through the floor with it but if you insist on disabling the thing then its most likely just a simple ground wire kill switch circuit, shouldnt be that hard to disable but you have to provide pictures and maybe describe the wiring.
also i bet there is a youtube video showing you how to do it. they always have videos showing how to defeat safety devices on things
that said, the shed can build up so much CO2 that it can choke out the generator and be so toxic that the person going in there to restart it can pass out inhaling such a concentration of gasses and it could be lethal if no one is there to drag them out to get fresh air
This post was edited on 6/15/19 at 4:17 pm
Posted on 6/15/19 at 4:24 pm to deuceiswild
quote:no worries
My apologies for maybe being a little harsh
but understand, you are asking us to tell you how to rig something that will be a present danger to those around it.
its not just the mice and roaches that may die because the shed has zero oxygen and toxic levels of CO2 that can make you pass out when inhaled. think more ways to ventilate the shed then that will make it less dangerous as well as not choke out the generator when oxygen levels drop too low
Posted on 6/15/21 at 9:04 pm to keakar
I run this thing outside away from my house but I keep getting fault from the co guard and it keeps shutting off I just want to take this thing off I'm not going to run this thing in any houses or enclosed spaces but live in California and get random power outages because of wildfires. I'm tired of waking up in the middle of the night in 105 degree temps to get this running again please help
Posted on 6/15/21 at 10:56 pm to deuceiswild
quote:
How the frick did you survive all these years without this sensor on yours?!?!?
You sound overly sensortive
Posted on 7/28/21 at 5:57 pm to deuceiswild
I can tell you how I would disabled my Brigges and Stratton CO device
I certainly understand your issue the CO shutoff module didn't come out till 2018 so there are millions and millions of Generators out there that have never had one. While I understand the intent is for saving lives and their are mini people whom owe their lives to this type of device.
However people who purchase a generator with a specific purpose, location and enclosure to run it in are now adults / professionals subjugated to a nanny controlled device.
OKAY so this is what I would do if I wanted to disable mine. I'm not telling you to do this. This is what I would do hypothetically.
Open the control housing and you will find a small circuit board with a battery shouldered to it. At one end of the circuit board is a four prong connector I would simply unplug it. The four contacts do the following things. 1 connect to neutral
2 connect to Hot 3 connect to ground or chaise 4 closes or opens circuit to ground or chaise when CO is directed.
1 and 2 charge the battery 3 and 4 open close the grounding circuit allowing the motor to start or forcing it to shut off.
I certainly understand your issue the CO shutoff module didn't come out till 2018 so there are millions and millions of Generators out there that have never had one. While I understand the intent is for saving lives and their are mini people whom owe their lives to this type of device.
However people who purchase a generator with a specific purpose, location and enclosure to run it in are now adults / professionals subjugated to a nanny controlled device.
OKAY so this is what I would do if I wanted to disable mine. I'm not telling you to do this. This is what I would do hypothetically.
Open the control housing and you will find a small circuit board with a battery shouldered to it. At one end of the circuit board is a four prong connector I would simply unplug it. The four contacts do the following things. 1 connect to neutral
2 connect to Hot 3 connect to ground or chaise 4 closes or opens circuit to ground or chaise when CO is directed.
1 and 2 charge the battery 3 and 4 open close the grounding circuit allowing the motor to start or forcing it to shut off.
Posted on 1/3/24 at 7:27 pm to MikeTierce
Hi, I disconnect the 4 prong connector which worked, the co2 sensor no longer goes off. But its now not powering any device's? Any ideas?
Popular
Back to top
Follow TigerDroppings for LSU Football News