- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Coaching Changes
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
Removing iron shafts
Posted on 5/20/22 at 1:53 pm
Posted on 5/20/22 at 1:53 pm
Any of you baws done this before without the "proper equipment"? Steal shafts so not really worried about melting them.
I have a torch and a gas burning range
I have a torch and a gas burning range
4
Posted on 5/20/22 at 2:20 pm to PureBlood
Should be all you need.
Posted on 5/20/22 at 2:37 pm to PureBlood
I’ve done it a few times, heat and pull
Posted on 5/20/22 at 2:53 pm to PureBlood
Heat it up with a torch, and pull the head off with your hands.
You don't need a puller for steel.
You don't need a puller for steel.
Posted on 5/20/22 at 3:55 pm to PureBlood
Heat ferrule up first lightly and use a box cutter to cut it off. You don’t want to melt it on the head or shaft. Turn head where the face is facing away from you. Get about an inch away and stay in one spot for about 8-10 seconds. You should see a small puff of smoke or hear a puff. Use gloves and twist head off.
Page 1 of 1
Back to top
Follow TigerDroppings for LSU Football News