- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: Replacing windows DIY
Posted on 10/12/21 at 9:10 am to burger bearcat
Posted on 10/12/21 at 9:10 am to burger bearcat
I did mine very easy. Take glass out, remove cross bar and prey top and bottom out. side piece pry from middle. new window just put in from outside the sheetrock will stop it in place just screw it in.
I might of did the side pieces first pry in the middle. Its been a while . But very easy. Windows are stander sizes they do not need to be special made. Just score the fins at bottom and break them off.
I bought mine for General window. They gone down hill since then.(Bought out)but you can get them anywhere.
I might of did the side pieces first pry in the middle. Its been a while . But very easy. Windows are stander sizes they do not need to be special made. Just score the fins at bottom and break them off.
I bought mine for General window. They gone down hill since then.(Bought out)but you can get them anywhere.
This post was edited on 10/12/21 at 9:18 am
1
Posted on 10/12/21 at 10:31 am to easy1234
quote:
Just score the fins at bottom and break them off.
I was having trouble with this last time. When demoing the old window, couldn't get the fin out. So score in with utility knives and then break?
Do I need an aluminum brake to put in the proper flashing around the siding? Or is flashing even needed?
Page 1 of 1
Popular
Back to top
Follow TigerDroppings for LSU Football News