- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: Self install metal roof?
Posted on 6/20/21 at 12:20 pm to SouthernInsanity
Posted on 6/20/21 at 12:20 pm to SouthernInsanity
AS a person who designed, estimated, material breakdown and then supervised over 1.5 million square feet of metal roof at Walt Disney World .....
1. Trash the American Standard BS on installing metal roofs. That is written around the old Copper Roof guys who sautered the seams and flashing ....It does no good on steel or aluminum.
2. I would find a local machine shop with a ten foot hand break. They can bend to your pitch and make all trim metal and flashings you need. At Disney we had five on site.
3. When you cut angles in panels ....what do you intend to do with cut edges? That cut panel may be at the ridge area ....exactly how do you intend to make that water tight? If you intend to use silicone forget it. The first time the temperature climbs ..that silicone breaks it's bod between metals and now is a piece of useless plastic floating around under the surface of the panel....with no water seepage capability whatsoever.
Two pieces of metal have electronic capability ....they will draw water uphill.
I can write a book if you wish ..... the trouble with all of this? The backyard ...I install metal roofs people are just and useless ......Good Luck ...
And Roofer Guys ...I meant to insult you all the way ...I fired crew after crew at Disney because of the useless habits of backyard ...roofers.
1. Trash the American Standard BS on installing metal roofs. That is written around the old Copper Roof guys who sautered the seams and flashing ....It does no good on steel or aluminum.
2. I would find a local machine shop with a ten foot hand break. They can bend to your pitch and make all trim metal and flashings you need. At Disney we had five on site.
3. When you cut angles in panels ....what do you intend to do with cut edges? That cut panel may be at the ridge area ....exactly how do you intend to make that water tight? If you intend to use silicone forget it. The first time the temperature climbs ..that silicone breaks it's bod between metals and now is a piece of useless plastic floating around under the surface of the panel....with no water seepage capability whatsoever.
Two pieces of metal have electronic capability ....they will draw water uphill.
I can write a book if you wish ..... the trouble with all of this? The backyard ...I install metal roofs people are just and useless ......Good Luck ...
And Roofer Guys ...I meant to insult you all the way ...I fired crew after crew at Disney because of the useless habits of backyard ...roofers.
Posted on 6/20/21 at 8:44 pm to bluedragon
Alot of good recommendations here, thank you all. After reading this I think I will take your wisdom to heart and hire it out. Thanks.
Popular
Back to top
Follow TigerDroppings for LSU Football News