- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: Getting Cell Signal and Wifi To Detached Shop
Posted on 2/19/21 at 12:14 pm to Korkstand
Posted on 2/19/21 at 12:14 pm to Korkstand
quote:
Can you explain in technical terms the reason for using shielded cable between buildings? Is it to prevent creating a voltage potential? Ground loop issues? Are those the same thing? Wouldn't the same problem exist if you run cable between two devices which are inside the same building and plugged into two different circuits?
I personally prefer shielded because the extra layering helps against the elements. You use it indoors if you think you're going to be running into a lot of interference, but outdoors you're less likely unless you're using the same conduit to run electrical (which some places tend to do). Conduit + shielded in this situation is probably just my personal preference and a good bit of overkill, but if you want to use the conduit for other wiring then definitely get the shielded.
Not for voltage issues really - your ethernet barely carries an electrical charge in comparison to actual electrical cables (but obviously can carry a surge). I know some folks will just lay a shielded cable on the ground and think that's enough, but rarely think about animals, or forgetting its there and hitting it with a mower, etc.
So yeah, don't think of ethernet cabling like electrical wiring. Shielding ethernet isn't for the same purposes.
Posted on 2/19/21 at 12:54 pm to skrayper
quote:Pretty sure that's a code no-no.
unless you're using the same conduit to run electrical (which some places tend to do)
quote:Newer PoE can approach 100 watts! Not on par with electrical but can still cause lots of damage.
Not for voltage issues really - your ethernet barely carries an electrical charge in comparison to actual electrical cables (but obviously can carry a surge).
Admittedly I'm not at an engineer's or electrician's level of understanding electricity, but as I understood it if there is too much difference between ground voltage at either end of a cable, it can create unwanted current to flow, and the drain wire in shielded cable prevents this. I know that ground loops are an issue inside the same house on different circuits with audio equipment, so I guess I don't get why it would or wouldn't be a problem for network equipment.
Popular
Back to top
Follow TigerDroppings for LSU Football News