- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
Condensation in the drum of dryer
Posted on 7/10/20 at 12:04 pm
Posted on 7/10/20 at 12:04 pm
I’m stumped.
Getting a little puddle of water in the drum of the dryer. Don’t believe it’s lint built up. Checked vent cap on the roof assuming it was screened, it wasn’t.
Not sure if it plays a part, but humidity INSIDE the home was high. HVAC adjusted coolant levels which hopefully helps with that.
Tile roof, vent goes through roof, 1 story, built in 2019
Getting a little puddle of water in the drum of the dryer. Don’t believe it’s lint built up. Checked vent cap on the roof assuming it was screened, it wasn’t.
Not sure if it plays a part, but humidity INSIDE the home was high. HVAC adjusted coolant levels which hopefully helps with that.
Tile roof, vent goes through roof, 1 story, built in 2019
Posted on 7/10/20 at 12:11 pm to Lazy But Talented
Is the vent line clear all the way through?
Posted on 7/10/20 at 2:34 pm to Lazy But Talented
Can't happen if vent is open to the outside. You got a clog somewhere.
Posted on 7/11/20 at 4:59 pm to Lazy But Talented
Does it accumulate in there over time, or is this just after the dryer run? Is it still effectively drying items? There is a belt driven blower in there under the drum that is what sucks the hot damp air through the lint trap and out of the dryer. I have found that the gear attached to the driveshaft of the blower can unscrew itself until it comes off. I've had to take the dryer apart, find the gear, put some lock-tite on it and screw it back o to the shaft, the. Get the belt back on it. Zero cost repair as long as you can find the gear and belt under there. I didn't have to remove the drum itself, but it would have been easier it I did.
To be clear, symptoms were: water puddling in the drum and leaking out of the dryer and clothes being scalding hot but still damp after the run
To be clear, symptoms were: water puddling in the drum and leaking out of the dryer and clothes being scalding hot but still damp after the run
Posted on 7/11/20 at 9:01 pm to Lazy But Talented
Your dryer vent is plugged. This happened to me once. You dont have enough air flow to get the moisture out
This post was edited on 7/11/20 at 9:03 pm
Popular
Back to top
Follow TigerDroppings for LSU Football News