- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: Push Mower problem: need help
Posted on 4/16/20 at 4:02 pm to Cincinnati Bowtie
Posted on 4/16/20 at 4:02 pm to Cincinnati Bowtie
When it starts, are you choking it extra? Sounds like it’s not getting enough gas. Possible the lines are clogged, your Carb float needs adjusted to allow more gas, or that your throttle needs adjusted.
Eta: re read about running with filter off sorry. Usually that means the air/ fuel mixture is off. If it’s the filter, it’s getting too much gas for the filter mix. If it’s too much gas the filter removed adds more oxygen.
So it’s likely getting too much gas, the float needs adjusted to reduce the gas or throttle adjusted to run better with current mixture.
Eta: re read about running with filter off sorry. Usually that means the air/ fuel mixture is off. If it’s the filter, it’s getting too much gas for the filter mix. If it’s too much gas the filter removed adds more oxygen.
So it’s likely getting too much gas, the float needs adjusted to reduce the gas or throttle adjusted to run better with current mixture.
This post was edited on 4/16/20 at 4:05 pm
Posted on 4/16/20 at 5:24 pm to baldona
I cleaned the jet. Going to try and clean the carburetor. Hopefully I can put it back together correctly.
This post was edited on 4/16/20 at 5:26 pm
Back to top
Follow TigerDroppings for LSU Football News