New Cabinet doors

You mean the face frame is 2” or the door stiles?

Blum will make a hinge that can cover that, but you’d likely need to drill (or have drilled) the cup hole in a certain spot to accommodate the overlay.

I know a lot of shops use Morgan Brothers for their doors if you’re ordering them.

For the hinges and slides themselves, I used Rok or Cornerstone (Cabinethardware.com).

Yes the frames where doors are hung are 2”. I am hoping to use a concealed, soft close hing. I’ll check out the website thanks

It depends on what overlay you’re looking for. A “full” overlay is more of a style, not a dimension.

Do the doors close on a center stile? Do you have doors back to back? All that can vary your overlay dimension, and hence your plate dimension and your cup drilling pattern. Blum has a table for each of their hinges detailing all the relevant dimensions for the overlay required.

For example, a 2” face frame with doors on each side (hinge side to hinge side), the overlay of each door is 15/16” (each door + 1/8” gap). If you have an outside stile that you want the same overlay, you’d need a 1-7/8” overlay.

quote:

---

I am having a hard time finding European hinge that can accommodate the current 2” stiles

---

Yeah you kinda painted yourself into a corner with the 2" inch stiles. I typically go 2 3/8". However, I'm sure Blum manufactures something that will accommodate you.