- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
Will it work??
Posted on 6/18/19 at 7:54 pm
Posted on 6/18/19 at 7:54 pm
TM foot looks turrible with rust and rust bubbles. I’m going to hit it with a wire wheel and acetone tomorrow morning and use “Flex Seal” to coat it. Anyone used this and did it work for your project? At $14/can the shite ain’t cheap and if it doesn’t work I’m going to take it to the guy who sprayed my bed liner.
Posted on 6/18/19 at 7:57 pm to KemoSabe65
I once cut a hole in my flat boat to make it a glass bottom boat using flex seal. It worked then and it should now.
Nah not really. I’ve never used it. Good luck tho.
Nah not really. I’ve never used it. Good luck tho.
Posted on 6/18/19 at 8:08 pm to KemoSabe65
The only way I know to fully cure rust is to remove every bit of it.
Check out POR 15 as a coating.
Check out POR 15 as a coating.
Posted on 6/18/19 at 8:09 pm to KemoSabe65
Not sure what a TM foot is but ospho is a great rust inhibiter.
This post was edited on 6/18/19 at 8:10 pm
Posted on 6/18/19 at 8:55 pm to KemoSabe65
Wire wheel it, then spray it with a zinc chromate primer, then spray it with an undercoating (similar to Flexseal).
Posted on 6/18/19 at 8:59 pm to Wilson
Flex seal didnt fix a leak in my waders. It probably will hold moisture against the foot when water leaks behind it making the problem worse
Posted on 6/18/19 at 9:02 pm to KemoSabe65
Have you thought about a small can of Herculiner... in my little bit of dealings with both products Herculiner seems to have better adhesion.
Posted on 6/25/19 at 2:19 pm to Hotgin
wire wheeled, primed and sprayed flex seal yesterday afternoon. Shite is very messy and doesn't spray even. Plan to spray a second cote today but the rain has that on hold. Really doubt flex seal is going to be the answer and will try the hurculiner route next. Don't have time to take off and leave anywhere right now.
Posted on 6/25/19 at 2:25 pm to KemoSabe65
Chris Coulter sprays them with bedliner at his shop. They look awesome...
This post was edited on 6/25/19 at 2:38 pm
Popular
Back to top
Follow TigerDroppings for LSU Football News