- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
Epoxy Garage floor Project
Posted on 5/6/19 at 11:32 pm
Posted on 5/6/19 at 11:32 pm
Anyone have experience with this ? There are several products to chose from and I'm not sure which to chose. The Rust-Oleum Rock Solid claims to be 20x stronger than epoxy. It is twice as much, but if it covers the square foot claimed, I can get away with about 400.00 for materials which isnt bad. Any suggestions appreciated.
7
Posted on 5/7/19 at 12:49 am to Luvpookie
I did my parent's carport with the stuff from epoxy-coat.com. Once prepped correctly, it went on easily. IIRC, I did two coats of it, and it has held up outdoors with two cars driving on it daily for maybe 8 years
Posted on 5/7/19 at 7:30 am to Luvpookie
I did my garage on my new house. 3 car garage. I forget the name, but I used a Benjamin Moore product (Garage Guard, maybe?). However, this wasn't an epoxy, it's a urethane which is tougher. It's all about surface prep. Don't just do the acid wash. Go rent the grinder. My steps were as follows:
pressure wash
surface grind
pressure wash
scrub with degreaser and pressure wash
roll on primer
first coat of color
second coat of color (add flakes during second coat)
clear coat
The most time consuming part was trimming all the edges on the primer and first color coat. I didn't trim the edges for the last coat of color or the clear. It looks fine. Only other important thing to know is that this stuff dries pretty fast so make sure you have some help. If you roll over areas that are already tacky, it will make streak marks.
Good Luck.
pressure wash
surface grind
pressure wash
scrub with degreaser and pressure wash
roll on primer
first coat of color
second coat of color (add flakes during second coat)
clear coat
The most time consuming part was trimming all the edges on the primer and first color coat. I didn't trim the edges for the last coat of color or the clear. It looks fine. Only other important thing to know is that this stuff dries pretty fast so make sure you have some help. If you roll over areas that are already tacky, it will make streak marks.
Good Luck.
Posted on 5/7/19 at 8:18 am to Luvpookie
Whatever you do, use the quality stuff. Don't use the crap from Lowes. I learned this the hard way.
Posted on 5/7/19 at 1:42 pm to Luvpookie
Go to sherwin Williams ask about the shark skin additive stuff is great for slip resistance
Posted on 5/8/19 at 11:31 am to Luvpookie
A friend of mine used a kit from Home Depot a few years ago with no issues. The prep work is key to it lasting for years.
Page 1 of 1
Popular
Back to top
Follow TigerDroppings for LSU Football News