- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
Posted on 9/6/18 at 9:01 am to Rohan
quote:
I need someone to crimp the ends of 8 cables
if you untwist them, I'll crimp
Posted on 9/6/18 at 9:22 am to Rohan
quote:
I need someone to crimp the ends of 8 cables. I don’t have the patience to do it. Anyone interested in making a little extra cash?
Yes, that's super easy man.
Posted on 9/6/18 at 10:59 am to Rohan
We use something like these. Idiot proof.
NOTE: If the pin is on the bottom as I suspect it is in this picture then those cables are backwards.
NOTE: If the pin is on the bottom as I suspect it is in this picture then those cables are backwards.
This post was edited on 9/6/18 at 11:01 am
Posted on 9/6/18 at 11:16 am to VABuckeye
quote:
NOTE: If the pin is on the bottom as I suspect it is in this picture then those cables are backwards.
lol..Its definitely upside down for a B configuration..I suppose depending on what you do with it, you just make the other side the same way
Posted on 9/6/18 at 11:30 am to VABuckeye
Those connectors are probmatic with POE cameras
Posted on 9/6/18 at 11:42 am to TigerWise
Because of the cut at the end I presume?
We run very little cable for cameras. I thank you for that information.
We run very little cable for cameras. I thank you for that information.
Posted on 9/6/18 at 12:59 pm to VABuckeye
Yeah, I think techs should probably change the blade more frequently
Posted on 9/6/18 at 2:13 pm to TigerWise
I agree with that. Platinum Tools should just up the price a bit and ship it with some spare blades.
Posted on 9/6/18 at 8:40 pm to VABuckeye
I tried using those pull throughs and found it took me twice as long as regular ones.
Posted on 9/6/18 at 9:18 pm to Meauxjeaux
If you still need work done and since you're site is downtown, which is where we've been de-commissioning and installing server racks/panels (cable runs/terminations) and setup in the chase towers and city plazas so we can do a walk through if you'd to see what we're working with.
You have equipment and cables already?
You have equipment and cables already?
Posted on 9/7/18 at 6:56 am to Meauxjeaux
Like anything new it takes a little getting used to. We started using speed crimps for keystone jacks. First the guys complained about them but in the end they're much faster to work with and no 110 punchdown tool is required. All eight wires get cut at the same time.
Posted on 9/7/18 at 1:32 pm to 9001
9001 and broadhead - thanks for the responses, but I got it done already. Brosef was able to make it out there yesterday morning and we got it all knocked out.
Posted on 9/7/18 at 1:41 pm to VABuckeye
I hear ya... I guess I'm so used to doing them the old way that I can just get exactly what I need for a clean insert and fully bottoming out in the terminator.
I probably had in mind that I could be faster and sloppier and get the same results. Lazy arse.
I probably had in mind that I could be faster and sloppier and get the same results. Lazy arse.
This post was edited on 9/7/18 at 1:42 pm
Popular
Back to top
Follow TigerDroppings for LSU Football News