- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: Adding a TV Mount to Brick Wall--How to Properly Support?
Posted on 9/12/17 at 4:37 pm to lnomm34
Posted on 9/12/17 at 4:37 pm to lnomm34
quote:
Probably 2 feet from the bricks
Just box it in. Get some 3/4 plywood for your plate. Horizontal 2x6 from the existing framework. Put a diagonal 2x4 to support from the bottom.
Posted on 9/12/17 at 4:53 pm to TU Rob
Lead anchors with lag bolts (in the mortar joints) , or toggle bolts (in the mortar joints)
Having access to the back you could literally drill a hole through and use a bolt with a large fender washer and a nylock nut on the back side.
Having access to the back you could literally drill a hole through and use a bolt with a large fender washer and a nylock nut on the back side.
This post was edited on 9/12/17 at 4:54 pm
Posted on 9/13/17 at 11:23 am to TU Rob
Ok, this is what I came up with as a solution. I'm going to try to get this done this weekend. I'll update this thread afterward with photos. I hope it doesn't end in a spectacular failure.
Don't hate on my Microsoft Paint (RIP) skills.
Don't hate on my Microsoft Paint (RIP) skills.
Popular
Back to top
Follow TigerDroppings for LSU Football News