Started By
Message

re: Etching your own Yeti/RITC/Ozark Trail cup/mug/tumbler

Posted on 5/3/16 at 3:42 pm to
Posted by jdavid1
Member since Jan 2014
2470 posts
Posted on 5/3/16 at 3:42 pm to
What kind of vinyl are you using for the mask? I would think regular vinyl would get eaten up.
Posted by DeoreDX
Member since Oct 2010
4061 posts
Posted on 5/3/16 at 4:02 pm to
quote:

I would think regular vinyl would get eaten up.


Whatever crap I get a Hobby Lobby. That's the reason you use an air eraser instead of the full sized sand blaster. Much lower air volume and operating pressure. I have zero problems with the vinyl wanting to peel off. Also the air eraser uses a very fine media. I use this stuff which is 220 grit. It is a really fine blast media closer to baby powder than sand.

LINK
first pageprev pagePage 1 of 1Next pagelast page
refresh

Back to top
logoFollow TigerDroppings for LSU Football News
Follow us on Twitter, Facebook and Instagram to get the latest updates on LSU Football and Recruiting.

FacebookTwitterInstagram