- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
LED tape/ribbon vs EL wire for a project.
Posted on 4/26/16 at 11:54 am
Posted on 4/26/16 at 11:54 am
I have been asked to build a cornhole game set.
I was looking into adding battery powered lights to the board. I would like to place the lights around the perimeter of the board and the circumference of the hole. The surface of the board needs to be smooth for obvious reasons and I would like to avoid placing the lights on the outside edge of the board for durability reasons.
I don't know much about LED light strips or EL lighting so, can anyone give me some advice about which would be best for this utility? I was thinking of using a 9 volt battery source for each board.
I was looking into adding battery powered lights to the board. I would like to place the lights around the perimeter of the board and the circumference of the hole. The surface of the board needs to be smooth for obvious reasons and I would like to avoid placing the lights on the outside edge of the board for durability reasons.
I don't know much about LED light strips or EL lighting so, can anyone give me some advice about which would be best for this utility? I was thinking of using a 9 volt battery source for each board.
Posted on 4/26/16 at 12:03 pm to Bleeding purple
Look for battery operated Christmas lights in LED. We have a couple of different ones we used for a wreath out front. The actual light is pretty small.
LINK
Just drill a hole roughly the same size as the light and attach them to the bottom. That way everything is concealed, and you just have a little light sticking up. You could mount them so the light is flush with the board pretty easily.
LINK
Just drill a hole roughly the same size as the light and attach them to the bottom. That way everything is concealed, and you just have a little light sticking up. You could mount them so the light is flush with the board pretty easily.
Posted on 4/26/16 at 1:50 pm to Bleeding purple
How about something like this, then put a layer of polyurethane over them to make the surface smooth an level.
Popular
Back to top
Follow TigerDroppings for LSU Football News