- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: SS Pop - Ongoing Aluminum Boat Refurb thread
Posted on 5/12/15 at 4:15 pm to Polar Pop
Posted on 5/12/15 at 4:15 pm to Polar Pop
After almost one year I have done a little work. Im not in any rush to get this done, just picking at it in my spare time.
I got the trailer wire wheeled down and threw on a few coats of primer then paint. I replaced all of the bunks, roller and winch.
Next is to get the tongue extended, new coupler, jack, hubs and wheels.
I had to drill out 5 rivets on the back of the boat below the waterline, along with 6 underneath the boat. The kneebrace had to be removed along with another bracket to get the old transom wood out. I will get the holes welded up once I am done with everything else.
I got new wood (1 piece 3/4" and 1 piece 1/2" , liquid nailed together, drilled it and sealed it with spar urethane. I got it mounted today with new machine screws and marine silicone/adhesive.
Next up is building a front deck with aluminum angle. Once I am done with that I will take boat and trailer to the welder and get that work taken care of.
I got the trailer wire wheeled down and threw on a few coats of primer then paint. I replaced all of the bunks, roller and winch.
Next is to get the tongue extended, new coupler, jack, hubs and wheels.
I had to drill out 5 rivets on the back of the boat below the waterline, along with 6 underneath the boat. The kneebrace had to be removed along with another bracket to get the old transom wood out. I will get the holes welded up once I am done with everything else.
I got new wood (1 piece 3/4" and 1 piece 1/2" , liquid nailed together, drilled it and sealed it with spar urethane. I got it mounted today with new machine screws and marine silicone/adhesive.
Next up is building a front deck with aluminum angle. Once I am done with that I will take boat and trailer to the welder and get that work taken care of.
This post was edited on 5/12/15 at 4:17 pm
Posted on 5/12/15 at 4:47 pm to Polar Pop
You redid the rivets yourself?
Posted on 5/12/15 at 4:47 pm to Polar Pop
you putting a rear deck on that thing?
Back to top
Follow TigerDroppings for LSU Football News