Started By
Message

re: Metal roof on home, who has one?

Posted on 3/16/14 at 1:12 pm to
Posted by CoastieGM
Member since Aug 2012
3185 posts
Posted on 3/16/14 at 1:12 pm to
quote:

then stripped it with 2x4's. All of the edges are capped so wind is not an issue.


So with the edges trimmed w/ 2x4's, you have a permanent air gap without that holds the air? (no circulation?) I'm trying to get my mind around these details.

The reason I'm so interested in the details (especially concerning wind) is that I'm tired of having to replace a bunch of shingles every time I go to my place in New Mexico. The month of July is basically one-month hurricane.

Posted by pdubya76
Sw Ms
Member since Mar 2012
5980 posts
Posted on 3/16/14 at 1:29 pm to
quote:

with the edges trimmed w/ 2x4's, you have a permanent air gap without that holds the air? (no circulation?) I'm trying to get my mind around these details.

The metal is corrugated so you have the ridges every 8 or so inches.This allows for airflow between the metal and the decking.There is a trim piece on the facia board that supports the slight overhang and trims it out.
Posted by CoastalReb
MS Gulf Coast
Member since Feb 2010
102 posts
Posted on 3/16/14 at 7:12 pm to
Yes as already stated the tin is corrugated every 8 inches or so so there is air flow under the ridges. The facia boards were capped with prebent metal specific to my roof pitch. The gable ends were capped to prevent any lift from the wind on the outside pieces of tin. The metal was screwed down with provided instructions according to a wind rating test withstanding 130 mph winds
first pageprev pagePage 1 of 1Next pagelast page
refresh

Back to top
logoFollow TigerDroppings for LSU Football News
Follow us on Twitter, Facebook and Instagram to get the latest updates on LSU Football and Recruiting.

FacebookTwitterInstagram