- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
Posted on 7/24/13 at 10:19 am to DownshiftAndFloorIt
Knowing how to weld and machine isn't always a good thing.
The funny thing is that I started with a Kehin flat slide carb- it would pull so much air across it that the carb would freeze up and contract so much that the throttle would stick wide open.
Ended up with a 33mm (I think) Kehin round slide from like an '86 CR250- the round slide seemed to be more ok with the cold and would allow the throttle to open and close right.
The funny thing is that I started with a Kehin flat slide carb- it would pull so much air across it that the carb would freeze up and contract so much that the throttle would stick wide open.
Ended up with a 33mm (I think) Kehin round slide from like an '86 CR250- the round slide seemed to be more ok with the cold and would allow the throttle to open and close right.
Popular
Back to top
Follow TigerDroppings for LSU Football News