- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
Repairing a hole in engineered marble bathtub deck
Posted on 3/13/26 at 4:31 pm
Posted on 3/13/26 at 4:31 pm
I replaced the spout on our Roman tub and I have a hole showing from the old spout. What should I use to fill the hole?
Thanks for the experts on the board.
Thanks for the experts on the board.
4
Posted on 3/14/26 at 2:21 pm to TigerKurt
The easiest way would get a cover plate via Amazon in the color finish of your existing hardware.
Trying to color match with some sort of epoxy or filler sounds like an absolute disaster.
I think they make the stick on ones where you can’t access the backside. I’d silicon that one on if so.
Trying to color match with some sort of epoxy or filler sounds like an absolute disaster.
I think they make the stick on ones where you can’t access the backside. I’d silicon that one on if so.
This post was edited on 3/15/26 at 12:25 am
Posted on 3/14/26 at 8:04 pm to TigerKurt
quote:
bathtub deck
My mind went straight to cgrand's sex deck, but I don' tthink that's what you mean.
Posted on 3/15/26 at 1:12 pm to PaBon
quote:
The easiest way would get a cover plate via Amazon in the color finish of your existing hardware.
This is what I would do as well. Depending on the size, you might be able to find something at Lowes or HD in the plumbing section. These are very inexpensive.
This post was edited on 3/17/26 at 1:16 am
Posted on 3/16/26 at 8:33 am to TigerKurt
When you say replaced OP, you mean you moved the spout or you went from like a 3 hole to a 1 hole? So you have the 1.5” hole or whatever left?
You should be able to find caps for that, likely in the color of your spout (ie chrome or gold) and the caps usually have a rubber gasket and you can tighten them down to seal it.
You should be able to find caps for that, likely in the color of your spout (ie chrome or gold) and the caps usually have a rubber gasket and you can tighten them down to seal it.
Page 1 of 1
Popular
Back to top
Follow TigerDroppings for LSU Football News