- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
2
Posted on 5/21/24 at 8:26 am to KemoSabe65
I try to avoid using adhesive to hang zip tie mounts. Prefer to use 316SS screws.
But in the cases I do have to use adhesive, Weldmount adhesive/hangers is my go to. Just sometimes hard to find the adhesive in stock. Prep is fairly typical, remove any loose surface paint/contaminants and rough up surface a little bit, then wipe with rubbing alcohol before sticking adhesive
But in the cases I do have to use adhesive, Weldmount adhesive/hangers is my go to. Just sometimes hard to find the adhesive in stock. Prep is fairly typical, remove any loose surface paint/contaminants and rough up surface a little bit, then wipe with rubbing alcohol before sticking adhesive
This post was edited on 5/21/24 at 8:28 am
Posted on 5/21/24 at 9:19 am to KemoSabe65
quote:
What’s the best adhesive to attach wire keepers inside of a console? Best prep method?
Marine Goop is what I use to install sticky backs. Just clean with alcohol, mount and I like to let them cure overnight. They will not pull off.
Page 1 of 1
Popular
Back to top
Follow TigerDroppings for LSU Football News