- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: Pulled the wiring harness from my fifth wheel
Posted on 4/7/24 at 10:12 pm to GAFF
Posted on 4/7/24 at 10:12 pm to GAFF
Oh there’s no electrical poles inside? It’s literally just a plastic box with wires and wire nuts?
Eta in that case maybe a wire got broken during the pull. It’s possible a wire could break and the insulation only stretch making it appear the wire is intact.
Eta in that case maybe a wire got broken during the pull. It’s possible a wire could break and the insulation only stretch making it appear the wire is intact.
This post was edited on 4/7/24 at 10:14 pm
1
Posted on 4/7/24 at 10:38 pm to dkreller
Yes, it's just your typical metal junction box where the wiring harness from the camper connects to all the wires within the camper.
Is there a way to test the brakes with a multimeter? I know you can have someone push the brakes and listen for the magnets to activate but I'll be solo on most of this.
Also my truck was registering when I hooked the rv up but after I rewired some stuff it's no longer doing so. Makes me think it's a wiring problem and not a wire being pulled loose. I'm just at a loss because with the lights working there's literally nothing else to wire up so it has to be wires connected wrong but every diagram I've seen has it the way mine is.
Is there a way to test the brakes with a multimeter? I know you can have someone push the brakes and listen for the magnets to activate but I'll be solo on most of this.
Also my truck was registering when I hooked the rv up but after I rewired some stuff it's no longer doing so. Makes me think it's a wiring problem and not a wire being pulled loose. I'm just at a loss because with the lights working there's literally nothing else to wire up so it has to be wires connected wrong but every diagram I've seen has it the way mine is.
Page 1 of 1
Popular
Back to top
Follow TigerDroppings for LSU Football News