Started By
Message

re: Settling PVC Pipe Cracked - How to Stop

Posted on 11/2/23 at 11:54 pm to
Posted by AndyCBR
Baton Rouge, LA
Member since Nov 2012
7579 posts
Posted on 11/2/23 at 11:54 pm to
Is there a 90 degree bend there?

Hard to tell from the picture.

Are you sure the thrust loads in the pipe from the water aren't putting stress on the pipe and cracking the fitting.

Most pipes of any size with flowing water get a concrete thrust block at every corner to strengthen the fitting junction. I wonder if the paver sand settled and then the pipe can move in response to the thrust load.
Posted by PerplenGold
TX
Member since Nov 2021
1199 posts
Posted on 11/3/23 at 1:49 pm to
Yes, 90 degree between the 6” downspout and 6” main line.

The crack is at the downstream end of the junction where the pipe inserts into the junction. In other words the junction cracked but the downstream pipe did not.

Hmm, something to talk to the installer about. He’s designed & installed many systems. Says this is the first time he’s seen this. Also getting a 2nd opinion.
first pageprev pagePage 1 of 1Next pagelast page
refresh

Back to top
logoFollow TigerDroppings for LSU Football News
Follow us on Twitter, Facebook and Instagram to get the latest updates on LSU Football and Recruiting.

FacebookTwitterInstagram