- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Coaching Changes
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
Water and herbicide rate mixture advice.
Posted on 9/9/23 at 1:15 pm
Posted on 9/9/23 at 1:15 pm
Just sprayed Celsius WG. I used the 3.2 grams per 1000 square feet rate. I have approximately 15,000 square feet so I put 46 grams of product and 15 gallons of water with surfactant. I had about 5 gallons of product left over. Am I ok since I put the 3.2 grams per gallon or did I not put enough product out? I was told that as long as you put the correct chemical in water, the amount of water didn’t matter.
1
Posted on 9/9/23 at 1:39 pm to shoelessjoe
You did not apply the entire 48 g (3.2 x 15 = 48 g) over the 15K sq ft; by having 5 gallons remaining (10 gallons sprayed) you applied 32 g over 15 K sq ft or 2.1 g/1000 sq.
Water is the carrier in this case, not a dilutant per se, but since you failed to spray the entire 15 gallons over the 15 K you fell short in your targeted application rate.
Water is the carrier in this case, not a dilutant per se, but since you failed to spray the entire 15 gallons over the 15 K you fell short in your targeted application rate.
Posted on 9/9/23 at 1:41 pm to CrawDude
Gotcha. I just have to slow down my sprayer. I drove to fast.
Posted on 9/9/23 at 2:59 pm to shoelessjoe
quote:
I drove to fast.
Yep
Posted on 9/9/23 at 5:12 pm to shoelessjoe
go over it again twice as fast with the remaining 5 gallons
Page 1 of 1
Popular
Back to top
Follow TigerDroppings for LSU Football News