- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: Help wiring 3 way smart switch
Posted on 5/10/22 at 6:13 am to Korkstand
Posted on 5/10/22 at 6:13 am to Korkstand
The easiest way I had wired one was put it after the last manual switch. It kind of acts as a third switch in line. Set it up to toggle from the manual light switches.
The "hard" part is figuring out how to supply it 120.
edit: Just saw a youtube video saying these don't support 120 as the switch voltage input like the other shellys. You'd still put it after the 2nd manual switch.
Do you have 3 wire romex going to your switches? If you only have 2 wire, I'm not sure this can be done.
With 3 wire, you'd remove the line voltage from the switches and use them as dry contacts to send the switch signal back to the shelly.
The "hard" part is figuring out how to supply it 120.
edit: Just saw a youtube video saying these don't support 120 as the switch voltage input like the other shellys. You'd still put it after the 2nd manual switch.
Do you have 3 wire romex going to your switches? If you only have 2 wire, I'm not sure this can be done.
With 3 wire, you'd remove the line voltage from the switches and use them as dry contacts to send the switch signal back to the shelly.
This post was edited on 5/10/22 at 7:17 am
Posted on 5/10/22 at 10:28 am to mchias1
quote:2 wire, and yeah I'm thinking I can't do it this way because one conductor has to carry 110 from switch to switch.
Do you have 3 wire romex going to your switches? If you only have 2 wire, I'm not sure this can be done.
I think I can get it done by putting one shelly in each box. As you said I will wire the one which controls these lights after the second switch, and then in the first box I have another circuit that I can use to run the shelly and I will just use it with the first switch to signal the other shelly.
Popular
Back to top
Follow TigerDroppings for LSU Football News