zbrous4

I think he was being sarcastic. I know I was.

How hard is this? Looking at a boat that needs to have the fuel tank cleaned of old gas and some residue.

Have seen some DIY videos where you just put in some additives like Star Tron and after letting it sit, you circulate the gas with a fuel pump and filters.

Thoughts or suggestions? Should I just have it done professionally?

I don't need 4k, and I like that is has the GTX 1060. Looks like it has similar specs. from the CPU, memory, storage, etc.

So I've never had any experience with MSI products...how are they from a quality standpoint? The reason I've been looking at the HP workstations is because I'm using one right now, and it's still going strong after over 7 years with only a few modifications, and I'm wanting something that can be maintained/upgraded similarly.

Also, this may be a dumb question, but I'm guessing the rainbow keyboard is just showing that you can set it to a range of colors?

Need some help here.

I'm picking out a new laptop for work, and I'm trying to find a balance between a lightweight portable machine and more of a mobile workstation. I work from home a decent amount, but I need the power to run Adobe Creative Suite, AutoDesk products, etc. I want a 15 inch screen (personal preference) and I need at least 500GB of storage because a lot of my work is on Dropbox (prefer at least part of that to be SSD).

The kicker is that our office just got an Oculus Rift (reviewing 3D architecture models), and if I get something with a decent graphics card, I could potentially use it on my machine instead of the communal one that is planned.

Anyway, I've been poking around on Newegg, and came across these two options:

Option 1 - HP ZBook Studio G3

Option 2 - HP Omen 15

Question: Based on the specs, it looks like the Omen is better choice (with an upgraded OS), but why is it so much less expensive? Am I missing something?

The best I can tell, and I'm no expert, is the OS, and the smaller SSD......there has to be something else, right?

Does anyone have experience with either of these?

Not cut yet. Will email pics tomorrow

I have a couple of trees that I need to cut down, but I don't have anywhere to haul the debris. Anyone have a pile that would be willing to let me dump a couple of trees?

It's two bradford pears and a crape myrtle FWIW.

When I moved this summer, I took my SL 5LNB SWM dish off my house to upgrade our tailgate setup. Took it out the first time and had no issue getting all satellites.

Ever since, I can not pick up the 99 satellite, no matter what I do. I have signals in the 90s on all other satellites, including 103ca and 103cb, but I am getting all 0s on 99. Once I got the 101 & 103 peaked, I have dithered to the max in both directions for elevation and azimuth but I dont even get a blip on the signal meter through the receiver.

What are the possible reasons for this? Bad LNB? Could it still be an alignment issue? Bad cabling?

A tunnel is probably more likely than a bridge, but to counter, you could end the bridge between the road and the railroad tracks to avoid interactions with the railroad and transmission lines.

BTW, this intersection has also been proposed to have a roundabout, which somewhat complicates it more.

I have about a yard of red clay leftover from a foundation project and I need to get rid of it somewhere.

Anyone know where in BR I may be able to take it? Or someone who wants it?

Just ran into him in the NOLA airport. Was sporting a TCU shirt so my guess is a recruiting trip....hence my thread location.

Not sure who he's visiting.