
- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Coaching Changes
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
Posted on 11/18/26 at 9:13 pm to PhilipMarlowe
quote:Yes, Imaging Science Foundation, or ISF for short, is the organization that certifies calibration training. You want an ISF Level II or III calibrator. Most professional AV / Home Theater /Home Automation companies have someone on staff that can perform a basic calibration, but Level II and III calibrators meet qualifications to access manufacturer service level hidden menu controls without screwing around and bricking your display.
I’ve always wondered about this. Can you give a ballpark figure on how much a pro calibrated setup costs? Is there a good site to go to and search for someone in my area?
I'm unsure what the current going rate is, but a lot has happened since I was actually working it in the field as a side gig. My specialty is no longer needed. I used to calibrate $40k-$120k three CRT tube projectors, like these:
Light comes on at three different angles. I had to align a cross hatch grid pattern, typically at between 64 - 128 different positions across the screen using electronic magnets, and lens manipulation. Then, once I had the grid completely calibrated to fit the screen properly, I had to color calibrate to the sources, and resolutions. Typically, a single projector would take two full days. In the late 90's through to about 2012/13 time frame, the only way to get extraordinary image quality was using these behemoths. Then digital projection started getting really good, then, OLED came out. Now, you can get really decent quality laser projection, but nothing has come close, yet, to the amazing richness and contrast ("like, for real 1,000,000:1 contrast) of a 9" CRT Projector.
Anyway, I commanded a fee of $5000 plus expenses, and annual touch-up were $1500 plus expenses. Since today's high-end TV's and projectors now do automatic grid calibration to fit the screen, the cost and time has to be far less, but it is charged based on the complexity of sources. If all you do is streaming and not film or video production, and no 4k Blu-ray, save your money and just get a good calibration disk if you use a Blu-ray player, but if you're the type to purchase a high-end Sony OLED, and use 4K UHD Blu-Ray or have a home theater using a real home theater grade projector, not a Costco sold product, an ISF technician can fine tune your display to meet Rec 709, the industry standard for color space. This is what every film and video production uses, plus the standards of HDR, Dolby Vision, HDR 10+, Apple Pro Rez, Canon Log and VC-5. Then, you have the 8VSB HD standard for OTA (over the air) broadcasts, which are at either 720p or 1080i. These operate at 59.94 frames per second. You have to calibrate separately for these, plus the standards of 24, 30 and 60 Hertz (frames per second) video, and in some cases now, 120p and 144p.
The cost of the job is going to be dictated by how thorough you want the calibration to be.
You can Google or use an AI to find ISF calibration experts nearest to you.
Posted on 11/19/26 at 2:23 pm to HubbaBubba
Thank you. All of you. Your comments have been helpful and appreciated.

Popular
Back to top


0








