Page 1
Page 1
Started By
Message

Marsh Anchor vs Power Pole Spike - anyone have opinions?

Posted on 8/14/26 at 12:14 pm
Posted by Prosecuted Collins
The Farm
Member since Sep 2003
7356 posts
Posted on 8/14/26 at 12:14 pm
I need to grab an anchor for shallow water.

I like the T handle on the spike, but not sure if anyone has any real world comparisons here. Had the marsh anchor on my last boat, worked great even if it took a throw or two to get set up right.
Posted by KemoSabe65
70605
Member since Mar 2018
7520 posts
Posted on 8/14/26 at 12:42 pm to
Like the spike proteins n the marsh.
Posted by Tiger Prawn
Member since Dec 2016
26315 posts
Posted on 8/14/26 at 1:52 pm to
How big of a boat and how deep of water?

I can throw my 6' marsh anchor and still work in 10-12' deep water.

I don't think you'll be able to throw the power pole spike to anchor in water deeper than the spike's length. Not enough weight.

And the marsh anchor will hold a bigger boat better if you're in any current. I'd probably only opt for the power pole spike if you're in a small skiff or jonboat and are only planning to use it in water shallow enough that you can push the spike into the mud.
Posted by KemoSabe65
70605
Member since Mar 2018
7520 posts
Posted on 8/14/26 at 2:15 pm to
quote:

can throw my 6' marsh anchor and still work in 10-12' deep water

But Why?
Posted by Prosecuted Collins
The Farm
Member since Sep 2003
7356 posts
Posted on 8/14/26 at 2:40 pm to
Marsh anchor it is thx!
Posted by Saskwatch
Member since Feb 2016
18360 posts
Posted on 8/14/26 at 2:56 pm to
Metal boat?
Posted by Prosecuted Collins
The Farm
Member since Sep 2003
7356 posts
Posted on 8/14/26 at 4:51 pm to
Yep
Posted by farad
Member since Dec 2013
12725 posts
Posted on 8/14/26 at 6:49 pm to
just make one...

8' copper ground rod from home depot = under $20
make sure you leave the pointed end in tack
anchor shackle = under $5
cut rod down to 6', or so, then take the cut off end, lay it on an anvil or something hard and flatten out the cut off end so you can drill a hole in it for the shackle
braded rope length of your choice...

this works awesome on my 18' aluminum boat and holds VERY well..



I've anchored this in 20' of water with a hard tide running and it held no problem...
This post was edited on 8/14/26 at 6:51 pm
Posted by Saskwatch
Member since Feb 2016
18360 posts
Posted on 8/14/26 at 7:30 pm to
quote:

Yep


Marsh anchor a good choice. If you have IPilot you probably need an anchor that gets all thay deep.

Stick it pins and Max Gain Systems are good options too but not metal like the marsh anchor
Posted by Lsutigerturner
Member since Dec 2016
7313 posts
Posted on 8/14/26 at 8:52 pm to
I bought two lightning rods cut them to I think like 4-5’ maybe a little longer. Drilled a whole on non pointed side. Threaded a stainless steel 1” clevis on the end. And tied 550 cord on the ends. And it’s so heavy and 550 so streamlined it was very simple to spear both side of my boat in the marsh from cc and no noticeable shifting.

Deeper water as long as wind was not absolutely cooking and it was marsh on bottom not sandy or rocky i would spear off the front and back of the boat and ot would keep with minimal shifting in 10’+
first pageprev pagePage 1 of 1Next pagelast page
refresh

Back to top
logoFollow TigerDroppings for LSU Football News
Follow us on X, Facebook and Instagram to get the latest updates on LSU Football and Recruiting.

FacebookXInstagram