Learn me something about spray paint guns?

Better question is will your compressor work.

Probably need a 4cfm and 15 gallon or better compressor.

I have a Campbell Hausfield 13 gallon
6.9 SCFM @40 PSI
5.5 SCFM @5.5 PSI

I’m guessing this will work then. I just wasn’t sure if there was a compressor that was made specifically for paint sprayers.

It will work ok, just don't expect to spray for more than a handful of seconds at a time. HVLP guns don't need more than 50 psi depending on the paint you are spraying but they do consume a considerable volume of air. I have a Kobalt siphon/pressure feed HVLP gun for latex paints, been painting my kitchen cabinets with it this week. Practice on a scrap piece of drywall and dial in the gun before you get started and buy/use paint filter funnels. Even new paint has gobs of solids that will block a sprayer with a quickness. These sprayers take patience and experience, don't be in a hurry.