Top load model - similar to Whirlpool Cabrio
Get code LD. Quick search says this means "Long Drain" and it times out after not draining soon enough. Youtube had me hopeful that something just had blocked drain at bottom of the tub but does not appear to be case. Opened drain and didn't see anything except some gunk/grime. Don't think that would block it. Drain line from pump to wall drain appears clear. Next option is replacing pump.

Anyone with tips?

3 ...

Report Post

Posted by ItzMe1972

Member since Dec 2013

9803 posts

Posted on 6/15/22 at 10:43 pm to Stateguy

Sometimes the pump get stopped up with a small item. May have to remove it to check out.

1 ...

Report Post

Posted by Stateguy

Baton Rouge

Member since Dec 2006

888 posts

Posted on 6/15/22 at 11:03 pm to ItzMe1972

Didn’t completely remove pump but did stick finger in and couldn’t feel anything. Impeller did seem to turn freely

0 ...

Report Post

Posted by CrawDude

Baton Rouge

Member since Apr 2019

5270 posts

Posted on 6/16/22 at 8:37 am to Stateguy

When I had similar problem with a Whirlpool Cabrio I had to replace the drain pump (DYI) to fix it. I think it was about 8 years old at the time. 2 years later started leaking waterfrom tub seal, DYI fix was to involved so I cut bait and bought a Speed Queen - figured I got my money out of the Cabrio with 10 years service. .

This post was edited on 6/16/22 at 8:38 am

0 ...

Report Post

Posted by Baers Foot

Louisiana Ragin' Cajuns

Member since Dec 2011

3543 posts

Posted on 6/16/22 at 8:53 am to Stateguy

Easy fix for my Whirlpool Cabrio not draining a few years ago might be worth a try. I had my drain hose too far down into the drain. Pulled it out a bit and used some wire to hold it in place and it started draining again. No problems since.

Page 1