re: Can’t remove washing machine agitator

Wish I could help. I removed the agitator on a Whirlpool after watching several videos. My model and those in the videos all had just the one bolt, and mine slid right out after the bolt was removed.

Mine was sticky getting the two pieces of the agitator apart after the whole unit was removed. This is apparently common, and it can take a good bit of force or even mallet taps to get them apart.

Is your agitator two pieces? If so and you are trying to replace the agitator dogs, you may be able to just pop the top half off and get the job done without removing the base piece.