- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
Gas stove ignitors not igniting
Posted on 2/21/20 at 4:30 pm
Posted on 2/21/20 at 4:30 pm
Gas flows fine, lights with lighter.
Spark is bright and blue, but won't ignite.
This happened first after the new made cleaned it. After her visit, it worked again. Now after this visit, not working.
Any suggestions?
Spark is bright and blue, but won't ignite.
This happened first after the new made cleaned it. After her visit, it worked again. Now after this visit, not working.
Any suggestions?
This post was edited on 2/21/20 at 4:47 pm
Posted on 2/21/20 at 4:45 pm to deeprig9
The first made always left a toilet clogged.
The second maid always left the ceiling fans wobbly.
Now this one is fricking up my stovetop.
The second maid always left the ceiling fans wobbly.
Now this one is fricking up my stovetop.
Posted on 2/21/20 at 5:03 pm to deeprig9
I figured out the issue.
The "pan" under the burners is removable. But the holes for the burners are different sizes. If you don't put it back in exactly one possible correct way, then the burners are in contact with the tray, so the spark goes sideways to the burner house instead of up to where the gas is.
Correct
Incorrect
The "pan" under the burners is removable. But the holes for the burners are different sizes. If you don't put it back in exactly one possible correct way, then the burners are in contact with the tray, so the spark goes sideways to the burner house instead of up to where the gas is.
Correct
Incorrect
This post was edited on 2/21/20 at 5:07 pm
Posted on 2/22/20 at 11:05 pm to deeprig9
After I clean mine sometimes there can be water or soap still in the orifice where the spark needs to get to the gas...it'll block it. Make sure you dry it completely.
Popular
Back to top
Follow TigerDroppings for LSU Football News