- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Coaching Changes
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
Home Water Pressure Drops Significantly
Posted on 12/27/19 at 11:07 am
Posted on 12/27/19 at 11:07 am
My home's water pressure drops substantially (from ~60 PSIG to ~15-20 PSIG) when I turn on a single point of use (shower, washing machine, toilet, etc.). I checked the pressure at a hose bib connection which tee's off from where the water enters my house.
I live in the Capital Heights area but the house was built somewhat recently (around 2000). I spoke to my neighbors and they do not seem to have the same issue.
My first though is maybe roots or a pinched line from the street to my house? The water company has changed out my meter already. It's 1/2" copper piping as far as I can tell. I've thought about putting in a new 3/4" line from the street. Thoughts?
I live in the Capital Heights area but the house was built somewhat recently (around 2000). I spoke to my neighbors and they do not seem to have the same issue.
My first though is maybe roots or a pinched line from the street to my house? The water company has changed out my meter already. It's 1/2" copper piping as far as I can tell. I've thought about putting in a new 3/4" line from the street. Thoughts?
Posted on 12/27/19 at 11:41 am to Forkz
Does the water kind of pulsate?
Between your water meter and where the main runs into the house, you should have a pressure regulator valve. Usually buried a foot or two from either your water meter or from your house. If that valve goes out, it defaults to reducing pressure. They typically last about 12 - 15 years.
Between your water meter and where the main runs into the house, you should have a pressure regulator valve. Usually buried a foot or two from either your water meter or from your house. If that valve goes out, it defaults to reducing pressure. They typically last about 12 - 15 years.
Posted on 12/27/19 at 12:03 pm to Forkz
check the outside faucet and see if its the same there, if it is then shut off the water at the meter and remove the stem and shaft from the shut off valve where it enters the house. then open the water meter valve and see if there is any pressure drop.
in most cases the shut off valve gets blocked or the seal gets stuck keeping it from opening all the way. the line builds pressure but as soon as its opened it cannot maintain pressure due to it being restricted
in most cases the shut off valve gets blocked or the seal gets stuck keeping it from opening all the way. the line builds pressure but as soon as its opened it cannot maintain pressure due to it being restricted
Posted on 12/27/19 at 3:33 pm to keakar
I see...it might be worthwhile to just change out the shutoff valve completely, just to be sure. Thanks!
Posted on 12/27/19 at 4:54 pm to Forkz
quote:
I see...it might be worthwhile to just change out the shutoff valve completely, just to be sure. Thanks!
try to find the same brand and valve, if you can all you have to do is shut off water at meter and unscrew the nut and the whole innerds come out so you just put the new one in and dont have to replace the valve itself or mess with connections
Popular
Back to top
2






