- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: Any Nitro Z18 owners? Transducer related
Posted on 3/7/19 at 8:57 am to Wtodd
Posted on 3/7/19 at 8:57 am to Wtodd
If its above the bottom of the boat it isnt dragging at all. It's probably not in the water at all at speed. That ain't the problem, mines 2 inches below the bottom.
So that leaves you with an issue. Again the 5200 probably wasnt cured fully if it didnt either rip the gel coat off or leave a very hard to remove residue on the transom.
You've got some kind of issue under the gel coat though. They just picked a really bad spot to put it, probably screwed into a foam joint or a void where there is no meat.
So that leaves you with an issue. Again the 5200 probably wasnt cured fully if it didnt either rip the gel coat off or leave a very hard to remove residue on the transom.
You've got some kind of issue under the gel coat though. They just picked a really bad spot to put it, probably screwed into a foam joint or a void where there is no meat.
1
Posted on 3/7/19 at 10:30 am to DownshiftAndFloorIt
quote:
. They just picked a really bad spot to put it, probably screwed into a foam joint or a void where there is no meat
This is my belief and Nitro needs to tell Bass Pro where the meat is
Page 1 of 1
Popular
Back to top
Follow TigerDroppings for LSU Football News