Started By
Message

re: Running electricity to my shed

Posted on 7/12/18 at 11:05 am to
Posted by keakar
Member since Jan 2017
30152 posts
Posted on 7/12/18 at 11:05 am to
quote:

After the pipe is installed, suck string through the whole run with a shop vac. Tape wire to string.


CLEARLY .... clearly, you have never in your life tried to pull wire through conduit longer then 20 ft if at all

its easier to slide the wire into the conduit before it is assembled and buried unless you have the strength of hurcules or just really like working your arse off. before its burried you can slide the wire in with no effort at all and then just slip the ends on over the short ends of the wire after to completely assemble it.

and, you will never pull romex wire past a regular 3/4" pvc 90, or ANY wire for that matter unless you buy the long radius gray conduit 90 for it like these LINK but they dont make it easy to get a neat compact connection at the boxes
This post was edited on 7/12/18 at 11:08 am
Posted by upgrade
Member since Jul 2011
13261 posts
Posted on 7/12/18 at 11:52 am to
quote:

CLEARLY .... clearly, you have never in your life tried to pull wire through conduit longer then 20 ft if at all


I have pulled up to 700’ duct banks. And more than likely bigger heavier wire than youve ever touched.
This post was edited on 7/12/18 at 11:59 am
Posted by upgrade
Member since Jul 2011
13261 posts
Posted on 7/12/18 at 11:56 am to
quote:

you will never pull romex wire past a regular 3/4" pvc 90


Why are we putting romex in conduit anyway


quote:

unless you buy the long radius gray conduit 90



I mean, I thought this was understood
first pageprev pagePage 1 of 1Next pagelast page
refresh

Back to top
logoFollow TigerDroppings for LSU Football News
Follow us on Twitter, Facebook and Instagram to get the latest updates on LSU Football and Recruiting.

FacebookTwitterInstagram