- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: Question for Taylor/Martin guitar guys
Posted on 12/21/17 at 11:50 am to olddawg26
Posted on 12/21/17 at 11:50 am to olddawg26
If you are going to attempt your own set-up for the first time (which I don't recommend with any guitar of reasonable monetary or sentimental/heirloom value), I strongly encourage you to watch a ton of videos on YouTube, practice on any beater guitars you may have or can put your hands on as learning tools (this is a GREAT time to buy an under-$100 pawn shop guinea pig) and no matter what, use the right tools for the task, especially for the truss rod - DO NOT IMPROVISE.
Taylor truss rods use a 1/4" bucket wrench. Post-2007 Martins use a 5mm Allen wrench with 4-5 inches of workable extension - the wrench's length has to penetrate a TR access hole in a top soundboard brace and extend to the body/neck block.
Taylor truss rods use a 1/4" bucket wrench. Post-2007 Martins use a 5mm Allen wrench with 4-5 inches of workable extension - the wrench's length has to penetrate a TR access hole in a top soundboard brace and extend to the body/neck block.
Back to top
Follow TigerDroppings for LSU Football News