- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: OB Woodworkers Help: Claw Miter? (Fishfighter this means you)
Posted on 3/10/17 at 1:44 pm to No Colors
Posted on 3/10/17 at 1:44 pm to No Colors
Claw Miter joint might be just what they call it there.
But you could honestly run with any of those other miter joints that some have posted for routers.
I don't think you'll be able to run that through a molder, since it runs boards through similar to a planer and the knives cut on the face grain.
This will have to probably have to be done with two fully-custom shaper bits. You would definitely want a shaper for this process. 16 footers continuously through will require some horses and a larger bit to not burn up the carbides so fast.
You could probably inquire with Freud, Amana or possibly Whiteside, although I think Whiteside does just router bits not shapers.
But you could honestly run with any of those other miter joints that some have posted for routers.
I don't think you'll be able to run that through a molder, since it runs boards through similar to a planer and the knives cut on the face grain.
This will have to probably have to be done with two fully-custom shaper bits. You would definitely want a shaper for this process. 16 footers continuously through will require some horses and a larger bit to not burn up the carbides so fast.
You could probably inquire with Freud, Amana or possibly Whiteside, although I think Whiteside does just router bits not shapers.
Posted on 3/10/17 at 2:01 pm to MadtownTiger
The OB is the man when it comes to this shite
![](https://images.tigerdroppings.com/Images/Icons/IconLOL.gif)
Posted on 3/10/17 at 4:52 pm to MadtownTiger
quote:
I don't think you'll be able to run that through a molder, since it runs boards through similar to a planer and the knives cut on the face grain.
quote:
This will have to probably have to be done with two fully-custom shaper bits. You would definitely want a shaper for this process. 16 footers continuously through will require some horses and a larger bit to not burn up the carbides so fast.
This is your answer. Running 5k bf, that will burn some bits unless you have real power.
![](https://images.tigerdroppings.com/Images/Icons/Iconcheers.gif)
Popular
Back to top
![logo](https://images.tigerdroppings.com/images/layout/TDIcon.jpg)