- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: LG front load washer PE code
Posted on 11/24/15 at 8:52 pm to ZacAttack
Posted on 11/24/15 at 8:52 pm to ZacAttack
Water level sensor
1) Verify that the black tube is still connected to the Water Level Sensor at the top of the washer---and to the Air Bell at the bottom of the tub.
2) Remove the black tube from the Water Level Sensor---and blow into tube---to clear a possible blockage. Reconnect and test washer.
3) Water Level Pressure Sensors rarely* fail.
1) Verify that the black tube is still connected to the Water Level Sensor at the top of the washer---and to the Air Bell at the bottom of the tub.
2) Remove the black tube from the Water Level Sensor---and blow into tube---to clear a possible blockage. Reconnect and test washer.
3) Water Level Pressure Sensors rarely* fail.
This post was edited on 11/24/15 at 8:54 pm
1
Posted on 11/24/15 at 9:01 pm to The Mick
I can't add to repairs but I can say after my wife's experience(s) with LG we moved to Speed Queen Commercial quite a few years ago and haven't looked back. Less expensive and better built.
Just my Speed Queen plug.
Just my Speed Queen plug.
Page 1 of 1
Popular
Back to top
Follow TigerDroppings for LSU Football News