Started By
Message

LG front load washer PE code

Posted on 11/24/15 at 7:22 pm
Posted by ZacAttack
The Land Mass
Member since Oct 2012
6416 posts
Posted on 11/24/15 at 7:22 pm
I have an LG front load washer that is giving a PE error code. It was giving the code at random times. Sometimes as soon as I turned the washer on, sometimes it would run a whole cycle, sometimes it would give the code halfway during a wash. I replaced the pressure switch assembly. Ran about 5 minutes of a wash and then gave to PE code. Anybody know anything about these washers?
Posted by WPBTiger
Parts Unknown
Member since Nov 2011
31457 posts
Posted on 11/24/15 at 7:26 pm to
I owned a front load LG, never again, LG or any other brand.
Posted by Napoleon
Kenna
Member since Dec 2007
69390 posts
Posted on 11/24/15 at 7:27 pm to
what's your model number?

Posted by The Mick
Member since Oct 2010
43341 posts
Posted on 11/24/15 at 8:52 pm to
Water level sensor



1) Verify that the black tube is still connected to the Water Level Sensor at the top of the washer---and to the Air Bell at the bottom of the tub.

2) Remove the black tube from the Water Level Sensor---and blow into tube---to clear a possible blockage. Reconnect and test washer.

3) Water Level Pressure Sensors rarely* fail.
This post was edited on 11/24/15 at 8:54 pm
Posted by nc14
La Jolla
Member since Jan 2012
28193 posts
Posted on 11/24/15 at 9:04 pm to
Don't purchase LG wash/ dry. Never purchase a front load anything. 40+ years of experience. Cut your losses now.
first pageprev pagePage 1 of 1Next pagelast page
refresh

Back to top
logoFollow TigerDroppings for LSU Football News
Follow us on Twitter, Facebook and Instagram to get the latest updates on LSU Football and Recruiting.

FacebookTwitterInstagram