- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
Hooking up an electric stove...
Posted on 10/16/15 at 6:12 am
Posted on 10/16/15 at 6:12 am
Should I hard wire it or install a 220 receptacle?
This post was edited on 10/16/15 at 6:13 am
Posted on 10/16/15 at 6:19 am to fumanchu2
Receptical . Lot easier if you want to pull stove out to clean up under it.
Posted on 10/16/15 at 6:27 am to fumanchu2
quote:
install a 220 receptacle
This!
Posted on 10/16/15 at 6:27 am to fumanchu2
I'm pretty sure code requires a receptacle.
I have never seen one hard wired.
I have never seen one hard wired.
Posted on 10/16/15 at 6:27 am to fumanchu2
Introduce it to the dishwasher over a few drinks.
Posted on 10/16/15 at 6:27 am to bencoleman
quote:
Install a receptacle
+1
Posted on 10/16/15 at 6:55 am to fumanchu2
quote:
Should I hard wire it or install a 220 receptacle?
If its a built it can be direct connected.
If its a push in range - 4 wire, 50 amp receptacle
Posted on 10/16/15 at 7:04 am to bencoleman
quote:
Install a receptacle
Posted on 10/16/15 at 7:06 am to fumanchu2
Just to clarify.
Hard wiring would require a junction box and carflex
Which is just as much if not more work than just installing a recep
Hard wiring would require a junction box and carflex
Which is just as much if not more work than just installing a recep
Posted on 10/16/15 at 7:10 am to fumanchu2
If it's a cooktop only, it is set up to hard wired.
If it's a free standing range (stove/oven) then it will need a receptacle.
If it's a free standing range (stove/oven) then it will need a receptacle.
Posted on 10/16/15 at 7:34 am to fumanchu2
Well, what is the appliance wired for? Does it have a pigtail or plug?
Posted on 10/16/15 at 7:45 am to fr33manator
quote:Electric Oven Profile:
Introduce it to the dishwasher over a few drinks.
Favorites:
Song: Electric Avenue
Dance: The Electric Slide
Place to Visit: Dachau (for the Ovens)
Dislikes: Power surges, power outages, people who constantly keep opening the door to check my goodies
Most Surprising Fact: Doesn't HATE the refrigerator.
Life Goal: Live off the grid, that would be cool
Posted on 10/16/15 at 9:05 am to poochie
Had to replace the old slide in range/ oven. the old one was hardwired. I disconnected it and was gonna hardwire the new on in the same way. The delivery / installation man told the wife that we needed a receptable to "safely" install the new one. wires are already there...I just have to hook them into the back of the stove.
Dude told the wife some shite about "if no recepticle, then lightening could fry the stove or start a fire"...
My main question is "will it burn my house down?"
Dude told the wife some shite about "if no recepticle, then lightening could fry the stove or start a fire"...
My main question is "will it burn my house down?"
This post was edited on 10/16/15 at 9:11 am
Posted on 10/16/15 at 9:25 am to fumanchu2
Reciptical. Hard wire means you need an electrician just to install a new stove.
Posted on 10/16/15 at 9:26 am to ATL-TIGER-732
Not true, hard wire is very common.
Maybe one in three.
Maybe one in three.
Posted on 10/16/15 at 9:29 am to fumanchu2
No, a lot of appliance installers don't know the first thing about the appliances they install.
You are fine hard wiring it.
All you have to do is cut the breaker off, wire it up and turn the breaker back on.
Black wire left, white in center, red in right, green or bare to ground screw, if no ground screw then wire it to white.
Simple.
You are fine hard wiring it.
All you have to do is cut the breaker off, wire it up and turn the breaker back on.
Black wire left, white in center, red in right, green or bare to ground screw, if no ground screw then wire it to white.
Simple.
Posted on 10/16/15 at 10:02 am to Napoleon
quote:
No, a lot of appliance installers don't know the first thing about the appliances they install.
You are fine hard wiring it.
All you have to do is cut the breaker off, wire it up and turn the breaker back on.
Black wire left, white in center, red in right, green or bare to ground screw, if no ground screw then wire it to white.
Simple.
Cool. This is what I decided on. Old one was hardwired. so I just did the same. 3 screws and 3 wires. back in business now. not sure if its up to code these days...but I will worry about that later...
Posted on 10/16/15 at 10:25 am to fumanchu2
A REAL man would hard wire it to 69kV.........and work hot.
Posted on 10/16/15 at 10:36 am to fumanchu2
Three wire is fine, you still have the ground through neutral.
Popular
Back to top
Follow TigerDroppings for LSU Football News